Page 20 - YG 2019

CASE STUDY i-SMART MODULAR TYPE END MILLS (Reference page CASE STUDY X5070 END MILLS (Reference page : p.627 ~ p.660)
◆
: p.613 ~ p.626)
◆
TEST REPORT Carbide 6 Flute 45° Helix End Mill for Hardened Steel

120 45 CUTTING CONDITION
YG-1
i -Smart 40 Competitor A Tools : 6Flute, X5070 45。Helix
Wear Land (㎛) 80 CUTTING CONDITION 35 Work Material : •AISI : H13
100
Size : Ø16×Ø16×40×110
Competitor A
Competitor A
•JIS : SKD61(HRc50)

•DIN : X40CrMoV5-1(1.2344)

30
30
60
Cutting Speed : 317 ft/min.
2 25
25
R.P.M : 1,920 rev./min.
Tools : 4Flute Corner Radius, Ø16, R1.0
40
Work Material : KP4M (HRc35 / AISI P20+Ni DIN
2 20
Milling Method : Down & Side Cutting
1.2738 Improved) 20 Feed : 35.91˝
20 Milling Depth : Axial : .9449˝
15
Cutting Speed : 511 ft/min. 1 15
R.P.M : 3,100 rev./min. Radial : .0378˝
0 10 Coolant : Dry Cut
1 10
32 65 131 196 Feed : 11.02 inch/min. Overhang : 2.05˝
Feed per Tooth : .0656 inch/tooth 5 5
Milling Lengthe (ft) Milling Method : Down & Side Cutting Machine : Machining Center
Milling Depth : Axial : .4724˝ 0 0
164
Radial : .0314˝ 0 0 164 328
Overhang/Coolant : 3.03˝/Wet Cut ft
Machine : Machining Center LCV 650
▶Cutting Edges YG-1
(Total Milling Length 328 ft)
YG-1 (Total Milling Length : 196 ft)

COMPETITOR A (Total Milling Length : 196 ft) COMPETITOR A

(Total Milling Length 328 ft)

COMPETITOR B (Total Milling Length : 196 ft)