Page 592 - CarrLaneCatalog_2019ed-c.pdf

DIAMOND-GROOVE BUSHINGS – METRIC

System for Fast Fixturing
DGM
PROBLEM:

ID RANGE ANSI
(G6) OD LENGTH PART NO. “We are an aerospace prototype shop making the
6mm DGM-5-6 transition from prototype to production on an important
1.00-1.80mm
5mm 9mm DGM-5-9 UAV project. We’ve developed elaborate fixturing of all
5.50-5.25mm 6mm DGM-5-6 shapes and sizes. We found ourselves leaving our trim
1.81-2.60mm
9mm DGM-5-9 fixtures set up on a large gantry style table and then
8mm DGM-6-8 having to tear everything down when a large part came
6mm
2.61-3.30mm 12mm DGM-6-12 along to make way for it.
6.65-6.25mm
16mm DGM-6-16
8mm DGM-7-8 This tied up one of our most valuable spindles, and dust
7mm
3.31-4.00mm 12mm DGM-7-12 collection was nearly impossible. Change over and setup
7.65-7.25mm
16mm DGM-7-16 times were totally out of control.”
8mm DGM-8-8
8mm
4.01-5.00mm 12mm DGM-8-12
8.65-8.25mm
16mm DGM-8-16
10mm DGM-10-10
10mm Machine Operator Tyler
5.01-6.00mm 16mm DGM-10-16
10.65-10.25mm Vaughn, of the Flying S,
20mm DGM-10-20
10mm DGM-12-10 places a carbon trim fixture.
12mm ®
6.01-8.00mm 16mm DGM-12-16 The Carr Lock receiver
12.65-12.25mm
20mm DGM-12-20 bushings allow for fixtures in
12mm DGM-15-12 various configurations.
15mm
8.01-10.00mm 20mm DGM-15-20
15.65-15.25mm
25mm DGM-15-25
12mm DGM-18-12
18mm
10.01-12.00mm 20mm DGM-18-20 SOLUTION:
18.65-18.25mm
25mm DGM-18-25
16mm DGM-22-16
22mm “I discovered that I could combine
12.01-15.00mm 28mm DGM-22-28
22.65-22.25mm
36mm DGM-22-36 80% of our trim fixtures into just
16mm DGM-26-16 one fixture plate using just two
26mm
15.01-18.00mm 28mm DGM-26-28 Carr Lock pins, with excellent
26.90-26.25mm
36mm DGM-26-36 locating ability and much better
Exclusively clamping than before.
Made in the
Our setup times have gone from
USA an average of about 25 minutes
to literally 30 seconds, thus
saving us hundreds of hours.”
Peter Bowman
Production Manager/Mfg Engineer
13
Flying S Inc.
www.carrlane.com/carrlock//aannnnneeeeeeane
www.carrlane.com/carrlock kkkkkkkkccccccoooooommmmmm/////////ccccccaaaaaarrrrrrrrrrrrlllllllloooooocccccckkkkkkkkcom/carrlock
See Pages 343-360

590 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com