Page 41 - ClayCraft - Issue 35 (January 2020)
P. 41

DIFFICULTY RATING ★ ★ ★ ★ ★




            26                                                   28



















           Score and slip the rim of the last coil, then apply
           another coil and fix it into place as you did with the
           previous ones.                                       If at any point you feel you are losing control of the
            Note: If you have firmed the clay up with a hairdryer   shape, simply cut a V-shaped section of clay from the
           at any point, it’s a good idea to score and slip the last   rim down, for as long as you need it to go, as shown. 
           coil before applying another.                          Once cut out, draw the edges back together, overlap
                                                                and blend them together. You can use a little slip if
                                                                required.
                                                                  Smooth over the join with a kidney to neaten up.



















          27





















          Pinch and blend the coils together to ensure a good
         seal, always supporting the shape on the foam bed as you
         work.                                                                                                      .
                                                                                               Issue 35 ClayCraft    41
   36   37   38   39   40   41   42   43   44   45   46