Page 62 - Jetpower (January 2020)
P. 62
058-062 JetShop 1.20:Layout 1 Englisch 09.01.2020 14:08 Uhr Seite 60
Ball joints, irons and files from Extron
The new Maxi ball joints from Extron
Modellbau are absolutely identical in
construction to the previously availa-
ble Kavan Maxi ball joints. The ball
cups are 22 mm long and the balls ha-
ve an outer diameter of 6 mm. There
are different packing sizes and ball
shapes. Prices start at € 1,95 € per pa-
ckage.
New in the Extron program is the foil iron Profi Star. As the name suggests, this iron is
ideal for covering polyester ironing films such as Oracover. It is also ideal for ironing and
re-stretching. The temperature is comfortable and infinitely variable. Due to the specially
shaped handle, the iron lies very well in the hand and can also be moved into corners
and narrow angles due to its slim design. The Extron Foil Iron is now available for € 29,-.
The Extron sandpaper file has a quick-release clamp for abrasive cloth and sandpaper. In-
cluded in the delivery are four abrasive cloth with 80, 120, 160 and 240 grit each.
Thanks to the special, pointed shape, you can get wonderful sanding
in corners where normal sanding blocks cannot reach. The Ex-
tron sandpaper file is available at a price of € 6,95.
The Extron Mini Planes for the modeller are also ideal for
balsa wood thanks to the extremely sharp Solingen blades.
With the plane, the blade can be placed in the middle or at
the edge. The price is € 13.95 including 5 replacement blades.
Extron Modellbau, Lauterbachstraße 19, 84307 Eggenfelden, Germany, Tel. +49 8721 5082660;
www.extron-modellbau.de
DPS-25 Battery Multiplex Lithium Battery
switch 25A Checker and model
from ACT locator
The DPS-25 (€ 84.95) is designed to switch on a recei- The new "Multitool"
ver system safely and without wear and tear and to supply from Multiplex is a
it with high current for best servo performance - while in- battery tester, loca-
creasing safety by using two separate receiver batteries for ting beeper and low
battery redundancy. The DPS-25 can also be used with on- voltage warning in
ly one battery as a pure receiver switch. In addition, the one (27.90 Euro). The
power supply must still function if one battery fails. These device can display the volta-
safety functions are provided by the DPS-25, while at the ge of each cell of the LiPo battery and
same time minimising components that are susceptible to indicates the remaining capacity as a percen-
faults. The switching output stages used ensure maximum tage value. Via the integrated sensor, the Lithium Bat-
and loss-free current flow, the internal resistance is consi- tery Checker detects whether the model is in motion or lying somewhere.
derably lower than the contact resistance of mechanical Using the adjustable threshold, an acoustic signal can be emitted after one
switches. The DPS-25 has the proven T-connector system minute of standstill, so that the model can be found in the high grass or off
as battery connection, on the receiver side there are three the airfield. The unit can remain in the model during flight and gives an au-
Futaba plug cables (contact socket); these allow continu- dible and visual warning when the set cell voltage threshold is reached (stan-
ous currents of up to 6 A. The cable cross section is 0.5 dard is 3.50 volts). This makes it easy to see if the battery is about to run out
millimetres. The negative conductor is made of silver - this when the model is flying past. Various displays provide a great deal of in-
allows the full power of the battery backer or the used bat- formation about the battery at a glance: Total voltage, remaining capacity,
tery to be transferred directly to the servo cables. cell drift and cell condition.
ACT EUROPE, Stuttgarter Straße 20, 75179 www.multiplex-rc.de
Pforzheim, Germany; www.act-europe.eu
Please note: On these pages we present novelties from all areas of model aircraft
construction. The information on the products described here is taken from the information
provided by the manufacturers, distributors and specialist dealers, who are also responsible
for the factual correctness.

