Page 58 - BE Mech Curriculum and Syllabus - R2017 - REC

Department of MECH | REC

3. Performance test in a fluidized Bed Cooling Tower

TOTAL: 60 PERIODS
OUTCOMES:
Upon completion of this course, the students will be able to:
 Understand the performance parameters of IC engines and their significance
 Understand the necessity and significance of a boiler trial
 Understand the performance parameters in a reciprocating compressor.
 Determine the heat transfer coefficient and performance of different heat transfer equipments
 Perform a load test on Refrigeration & Air- conditioning test rig to determine their effectiveness.

METROLOGY AND MEASUREMENTS L T P C
ME17513
LABORATORY 0 0 4 2

OBJECTIVES:
 To understand the basic principles of measurement.
 To understand the method of measurement and selection of linear measurement instruments.
 To know the selection of suitable angle measurement instruments.
 To learn various parameters of form measurement like screw thread, gear and surface roughness and
usage of related instruments.
 To learn the basics and measurement procedure for mechanical parameters measurements.

LIST OF EXPERIMENTS

1. Tool Maker’s Microscope
2. Mechanical Comparator
3. Sine Bar and Sine Centre
4. Gear Tooth Vernier Caliper
5. Floating gauge Micrometer
6. Co ordinate Measuring Machine
7. Surface Finish Measuring Equipment
8. Vernier Height Gauge
9. Bore diameter measurement
10. Force Measurement
11. Torque Measurement
12. Temperature measurement
13. Autocollimator
14. Vibration parameters measurement

TOTAL: 60 PERIODS
OUTCOMES:

 Able to understand the basic principles, errors in measurement and perform the calibration of
instruments.
 Ability to measure various linear dimensions and selection of suitable instrument based on
requirement.
 Able to conduct experiments and find the angle of given specimens using appropriate instrument.
 Able to handle and conduct experiments on form and surface measurement instruments and can
interpret readings and values to find the various parameters of gear and screw thread parameters.
 Ability to select the suitable instrument and measure mechanical parameters like force, torque,
temperature and vibration.

Curriculum and Syllabus | B.E. Mechanical Engineering | R2017 Page 58