Page 56 - BE Mech Curriculum and Syllabus - R2017 - REC

Department of MECH | REC

UNIT III: PHASE CHANGE HEAT TRANSFER AND HEAT XCHANGERS 12
Nusselt’s theory of condensation - Regimes of Pool boiling and Flow boiling. Correlations in boiling and
condensation. Heat Exchanger Types - Overall Heat Transfer Coefficient – Fouling Factors - Analysis –
LMTD method - NTU method.

UNIT IV: RADIATION 12
Black Body Radiation – Grey body radiation - Shape Factor – Electrical Analogy – Radiation Shields.
Radiation through gases.

UNIT V: MASS TRANSFER 12
Basic Concepts – Diffusion Mass Transfer – Fick’s Law of Diffusion – Steady state Molecular Diffusion–
Convective Mass Transfer – Momentum, Heat and Mass Transfer Analogy –Convective Mass Transfer
Correlations.
TOTAL: 60 PERIODS
COURSE OUTCOMES:
Upon the completion of this course students will be able to
 Apply steady state heat conduction problems for composite systems and fins.
 Solve problems in natural and forced convection for internal and external flows.
 Calculate the effectiveness of heat exchanger using LMTD and NTU methods.
 Illustrate radiation shape factors for various geometries.
 Demonstrate the phenomenon of diffusion and convective mass transfer.

TEXT BOOKS:
1. Yunus A. Cengel, "Heat Transfer A Practical Approach", Tata McGraw Hill, 2015.

REFERENCES
1. Frank P. Incropera and David P. Dewitt, "Fundamentals of Heat and Mass Transfer", John
Wiley & Sons, 2011.
2. Holman, J.P., "Heat and Mass Transfer", Tata McGraw Hill, 2011.
3. Sachdeva R C, “Fundamentals of Engineering Heat and Mass Transfer” New Age
International, 2010, 4th edition.
4. Ghoshdastidar, P.S, "Heat Transfer", Oxford, 2012.

5. Nag, P.K., "Heat Transfer", Tata McGraw Hill, New Delhi, 2011.

L T P C
ME17511 KINEMATICS AND DYNAMICS LABORATORY
0 0 4 2

OBJECTIVES:
 To supplement the principles learnt in kinematics and Dynamics of Machinery.
 To understand how certain measuring devices are used for dynamic testing.

LIST OF EXPERIMENTS
1. a) Study of gear terminologies.
2. Experimental study of gear profile.
3. b) Study of gear parameters.
4. Experimental study of velocity ratios and no of teeth of simple, compound, Epicyclic and differential
gear trains.
5. Study of Mechanisms.
1. Determination of Mass Moment of Inertia of axisymmetric bodies using Turn Table apparatus.
2. Determination of Mass Moment of Inertia using bifilar suspension and
compound pendulum.
3. Motorized gyroscope – Study of gyroscopic effect and couple.

Curriculum and Syllabus | B.E. Mechanical Engineering | R2017 Page 56