Page 30 - CloudCuddle Handleiding

EN EN

1. Tube cover: protects the inflatable frame e. 4. Transparent mesh
Parts of the tube cover (view photo 1) a. Parts of the transparent mesh (view photo 9)
a coloured ‘legs’ f. m transparent mesh
b white socks n runner (white runner to open the mesh) o.
c opening for valve o zipper n.
d valve cover (with Velcro) f. c./d.
e snap fastener (to close the cover at the top – view photo 2) m.
f zipper closures (on either side), each side has 2 zipper closures: one for b. 5. Mattress cover
opening the tube cover, and one for opening the mesh. The zipper closures g. Parts of the mattress cover
can be distinguished by the different colours of the zipper runner / puller. p cover Photo 8: Photo 9:
g straps with click buckle: for attachment to the bed frame (each leg has a strap) Photo 1: Photo 2: q 4 straps for attachment to the mattress (view photo 10)
r replaceable sheet (view photo 11)
The start of the zipper is visible at the top of the sheet. The zipper runner is p.
at the bottom of the sheet.
2. Inflatable frame (in the tube cover).
Parts of the inflatable frame q.
h inflatable tubes (view photo 3) h. 6. valve r.
i valve Parts of the valve (view photo 12)
j connection tubes k. s valve entry
k tube clips t rear valve cap (round, with serrated edge)
open clips: photo 4 u front valve cap (square)
closed clips: photo 5 i. Photo 10: Photo 11:
l frame zippers (8x) (view photo 6 and 7) j.
these zippers are designed to replace the inner tube. Caution: never open 7. Pump (can be ordered separately)
them when the frame is inflated. Parts of the pump (view photo 13)
Photo 3: Photo 4: Photo 5: v handle v.
w pump body
3. white socks x hose
The ends of the inflatable tubes are in the white socks (view photo 8). One sock has an y connector hose - pump w.
aperture for the valve. z connector hose - CloudCuddle valve s.
l. t.
x.
y.
u.
z.
Photo 6: Photo 7: Photo 12: Photo 13:

28 29