Page 137 - US ACCESSORIES GUIDE (2019)

MERCRUISER

TRIM IN LIMIT SPACER KITS GEAR LUBE MONITOR KITS

Reduces "stern lift" by preventing the drive unit from reaching the last GEAR LUBE MONITOR KIT
few degrees of full trim under. See MerCruiser Service Bulletin # 94‑1
for additional details.

TRIM LIMIT SPACER KIT

806193A49
Mounts on inner transom, connecting internally to the upper driveshaft housing.
Includes low gear lube warning sensor that connects to the engine audio warning
system. Warning feature requires that the Audio Warning System is installed on the
engine.
23-806445A 1
Internal Cylinder Kit, For negative trim (in) limit of .750 in.(19 mm) to 1.00 in.(25 Fits Alpha One Gen II (s/n 0D491000 and above).
mm). GEAR LUBE RESERVOIR KIT
Fits Bravo drives (s/n 0F214599 and below)
MERCRUISER TRAILERING CLIPS

To support drive in the tilt up position while trailering.
TRAILERING CLIP

865585A02
1 quart reservoir kit with float switch.
Designed to replace the smaller rectangular reservoir for added gear lube capacity.
Fits Bravo drives running under excessive loads in a heavy use environment.
GEAR LUBE RESERVOIR RELOCATION KIT

817019T 2
Fits MC‑I, R, MR, Alpha, Bravo & Vazer drives.
Priced & packaged in qty. of 2
Mercury Branded, Clamshell Package Point of Sale Packaged.
817019Q 2
Fits MC‑I, R, MR, Alpha, Bravo & Vazer drives.
Priced & packaged in qty. of 2
Quicksilver Branded, Clamshell Package Point of Sale Packaged.
806054A 1
Reservoir Relocation Kit. Used to relocate the "square" reservoir bottle from the
engine to the transom. This kit should be used when the installation of any other
accessory kit would interfere with the reservoir at its factory installed location.
Fits Alpha & Bravo models (1994 and newer)

124 Place Orders | Print Invoices | Register Product | Pay Online