Page 48 - US ACCESSORIES GUIDE (2019)

OUTBOARD

TRIM REDUCER KIT TILT SUPPORT BRACKET KIT OUTBOARD

858915A 1 25C05 41.75 8M0072610 58C30 97.17
Kit includes a series of spacers to be installed in the trim cylinder. This shorter bracket will support the engine in a reduced trim up position when tilt is
Fits V‑6 outboard applications (USA 0D082000 and Newer) and the 4 cylinder limited. Prevents engine from trim bleed down. Recommended for use with the trim
135/150/175/200 hp. Verado outboard. limit control 8M0059532.
Fits the F150 EFI FourStroke outboard, serial number 1B905505 and above.
TRAILERING TILT SUPPORT BRACKETS
TRAILERING CLIP
Locks motor in a tilted position.
TRAILERING CLIP
TRAILERING TILT LOCK KIT

833006A 1 22C35 37.25
Clips over center trim ram in extended position. Locks motor in a tilted position.
Fits Mercury/Mariner V‑6 engines with Design II (3 ram) power trim systems and
the 135/150/175 hp. Verado outboard.
830578A 1 115C60 192.67
Locks motor in a fully tilted position. BATTERY CABLE KIT
Fits Mercury/Mariner 6 ‑ 15 hp. 2 cycle and 9.9 hp. FourStroke (1995 thru 1998).
See application chart for specific engine models. Longer than standard, consists of two, 12 ft. (3.66 m) battery cables.
TRAILERING TILT LOCK KIT
BATTERY CABLE KIT

819504A 2 91C55 152.58
Positions engine at half tilt for trailering. 84- 88439A50 56C40 94.00
Fits Force 90‑150 hp. 2 cycle models with or without power trim, 1994 and prior Pair of 12 ft.(3.7 m) cables, 1 red (+) Positive and 1 black ( ‑) Negative, 4 gauge
with ring terminals. This is an optional accessory kit and may not reflect the original
(0E093699 and prior). cables on your engine. For original manufactured service part replacement, the
Electronic Parts Catalog should always be used for each specific engine. For
alternate length cables, consult the approriate service manual.
Fits Mercury/Mariner outboard engines.

2019 US Accessories Guide 35