Page 1122 - Quicksilver Product Guide (2020) - 8M0163242

ENGINE ACCESSORIES

Model Model Notes Year Range Serial # Range Oil Drain Hose Kit with Tether

MCM V-8 (454cid) 1/2-20 oil plug threads 1982 - 1996 6083145 - 0F800699 32-865277A02
MCM V-8 (454cid) 12MM oil plug threads 1996 - 2001 0F800700 - 0M024999 32-865281A02

MCM V-8 (496cid) 12MM oil plug threads 2009 - 2012 1A349411 - 1A352731 32-865281A02

MCM V-8 (502cid) 1/2-20 oil plug threads 1990 - 1993 0C878221 - 0F802599 32-865277A02
MCM V-8 (502cid) 12MM oil plug threads 1996 - 2019 0F802600 - 0M024999 32-865281A02
(1) Kit not available

WATER ELIMINATOR FUEL FILTER

Uses polymer crystals encased in a plastic filter to absorb water from
the fuel in a fuel tank. Supplied with a 2 ft.(610 mm) lanyard. Sold in
counter display box. Approximate dimensions: 3‑1/2 in.(89 mm) a 1‑1/4
in.(32 mm).
WATER ELIMINATOR

35-864572 MERCURY® MERCRUISER®
Replacement in‑line filter
Fits all MCM/MIE gasoline engines using a boost pump.
HIGH CAPACITY WATER SEPARATING FUEL
FILTER - GASOLINE OR DIESEL
67-808887Q WATER SEPARATING FUEL FILTER KIT
Contains a drying agent commonly used to keep small, sealed containers dry. It
absorbs water that has collected in the fuel tank.
How to use: Attach to the inside fuel cap with the lanyard (included). Adjust the
lanyard so the Water Eliminator sits at the bottom of the fuel tank. Replace as
needed.
For use in all octane grades of gasoline, including ethanol blended. Not
recommended for diesel fuel.
For use in all 2‑cycle and 4‑cycle gasoline outboard, sterndrive, inboard and jet
drive marine engines.
Priced individually, sold @ multiples of 6
Quicksilver Branded, Point of Sale Packaged.

FUEL FILTER KIT
35-8M0082290
FUEL FILTER KIT Kit consisting of our vessel mounted head (without fittings) and our High Capacity
water separating fuel filter. Our brass fittings may be used with gas engines but
stainless steel fittings p/n 22‑8M0058419 are required in diesel applications. Filter
features 10 micron, 90% efficiency with a 120 gallon per hour flow rate.
Compatible with most 2‑Stroke and 4‑Stroke Outboards and most Inboard &
Sterndrive Gas and Diesel Engines.
Quicksilver Branded

35-864572A 1
Prevents blockage of the boost pump inlet from debris that may be in the fuel tank.
This filter is installed in‑line between the fuel tank and boost pump. Standard
equipment with all current engines using a boost pump. This filter will backfit older
MerCruiser 8.1S/496 Mag engines.
Fits all MCM/MIE gasoline engines using a boost pump.

Quicksilver Product Guide 1113