Page 140 - Quality Manual_Web_Neat

QAP 150
Handling, Storage, Preservation & Delivery

a. PURPOSE
The purpose of this procedure is to define the means of handling,storage,preservations
and delvery for all materials or products used by the company so as to ensure the
quality of final product.
b. SCOPE OF APPLICATION

This procedure applies to all materials delivered to site, all construction work on site
and all personnel responsible for handling such products until handed over to the
customer.
c. DEFINITIONS

None

d. CROSS REFERENCE
 Quality manual, (clause d.15)
 Control of customer supplied product – QAP 70
 Product identification and traceability QAP 80
 Inspection and testing – QAP 120
 Control of inspection, measuring and test equipment – QAP 110

 Inspection and test status – QAP 120
 Control of non-conforming product – QAP 130
e. RESPONSIBILITY FOR APPLICATION

Department heads / project engineers and store keepers are jointly responsible at
varying intervals for the application of this procedure.
f. PROCESS

f.1 General
f.1.1 Purchased products should be inspected and / or tested in accordance
with the inspection and testing procedures.
f.1.2 The status of product should be dealt with in accordance with inspection
and test status procedures.
f.1.3 froduct identification and traceability should be established in accordance
with the product ndentificaiton and traceability procedures and control
customer supplied product procedures as necessary.

f.1.4 Non-conforming product will be dealt with in accordance with the control
non confirming product procedures.

f.1.5 For handling, storage, packaging and preservation of inspection measuring
and test equipment , the procedures for control of inspection measuring

and test equipment should be followed.
f.1 Handling and storage

f.2.1 All raw materials used by the company are stored on site and as such
each site shall, where space allows, designate storage areas. When space
141
AL HABBAI - QUALITY MANUAL