Page 212 - 2018 Master Catalog

HIGH-PERFORMANCE
ACCELERATOR PUMP
PLUNGER AND SPRING
PART NO. DESCRIPTION
CARBURETOR 1982 Shorter than standard street plungers. Gives additional pump shot volume.
FITTINGS
PART NO. DESCRIPTION

8096 Vacuum Fitting (low profile) CHOKE KITS
8087 #6 AN Fitting for Edelbrock Square-Bore & Carter AFB Carbs (5/8” -20) PART NO. DESCRIPTION
8089 Banjo Fitting for Edelbrock Square-Bore & Carter AFB Carbs (5/8” -20)
8090 Inverted Flare Fuel Line Fitting for Edelbrock Square-Bore & AFB Carbs (3/8”)
1932 For converting Hot Air Choke to Electric Choke

THROTTLE BRACKETS
AND HARDWARE MAINTENANCE KITS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
12750 For use with most 4160-Style Models
8020 Automatic Trans. Kickdown Lever Kit for Chevy (early Holley Double-Pumper) 12760 For use with most 4150-Style Models
8029 LS1 Throttle and Trans. Bracket (for carbureted applications)
8030 Throttle, Cruise Control & Trans. Kick-Down Mounting Bracket for SB Chevy
8036 Throttle, Cruise Control & Trans. Kick-Down Mounting Bracket Cad. for SB Chevy NEEDLE AND SEATS
8031 Universal Throttle Bracket for Small Block & Big Block Chevys Kit includes needle and seat assembly,
8032 Universal Throttle Bracket for Small Block Chevy Vortec/E-Tec
two gaskets, and one O-ring.
PART NO. DESCRIPTION
FUEL INLET AND FILTER KITS
These fuel inlets for Edelbrock carburetors 12605 Non-Adjustable Inlet Needle with Viton® Tip 0.110”
provide a clean and custom plumbing solution.
Manufactured of plated steel and include a 5/8”
-20 threaded banjo bolt with gaskets.
PART NO. DESCRIPTION MANIFOLD SELECTION

8126 Chrome Steel Fuel Line with 3/8” Barbed End Inlet and w/o Fuel Filter PERFORMER® (IDLE TO 5500 RPM)
8131 Chrome Steel Fuel Line with Polished Aluminum Filter Dual Plane, low-rise intake manifolds with a 180° firing order and patented runner
8134 Chrome Steel Fuel Line with Blue Anodized Aluminum Filter
design that you won’t find in other brands. Greatly improves torque over a wide rpm
range for excellent throttle response, especially off-idle through the mid-range.
HIGH FLOW FUEL FILTERS
For high volume fuel systems these high- PERFORMER RPM® (1500 TO 6500 RPM)
quality fuel filters are manufactured of billet Dual Plane, high-rise intake manifolds with a 180° firing order to produce incredible
aluminum and offer 40 micron filtration. top-end horsepower while retaining good throttle response. Intended for high-
PART NO. DESCRIPTION performance street or competition engines that run up to 6500 rpm.

8129 Polished Aluminum Filter PERFORMER AIR-GAP™ AND RPM AIR-GAP®
8130 Blue Anodized Aluminum Filter
Features and open air space that separates the runners from the hot engine oil,
resulting in a cooler, denser charge for more power. RPM Air-Gap are for high
performance street power from 1500-6500 rpm, and Performer Air-Gap are ideal for
DUAL-QUAD FUEL HOSE KIT street performance from idle-5500 rpm.
Supplies fuel to two Edelbrock carbs when
used on Edelbrock Dual-Quad manifolds. VICTOR® SERIES (3500 TO 8500+ RPM)
PART NO. DESCRIPTION Single-plane, high-rise intakes designed for maximum race-winning power at higher
engine speeds. Available for single or multiple-carburetor set-ups.
8088 Red anodized finish
8091 Endura finish
FUEL INJECTION MANIFOLDS
Enhanced engine breathing and balanced cylinder-to-cylinder air/fuel distribution
FUEL PUMP TO CARB for improved performance, drivability and economy.
INLET HOSE KITS
PART NO. DESCRIPTION PRO-FLO XT® (1500 TO 7000 RPM)
Engineered with a large plenum and long tapered runners to deliver maximum
8123 Braided Stainless Steel Fuel Hose Kit (SB Chevy, SB & BB Chrysler) horsepower and broad torque throughout the rpm range.

212