Page 583 - CarrLaneCatalog_2019ed-c.pdf

LOCKSCREWS AND CLAMPS

ROUND END CLAMPS

B 1/2 D
A

D
R RADIUS
H
E
G
F
A heavy-duty alternative to lockscrews. Allows locating tapped STANDARD MOUNTING (INCH)
hole farther away from bushing to avoid interference with a larger H
liner. Use on either the “slip” or “fixed” side of a slip-fixed renewable PART SOCKET-HEAD
bushing. Available in two heights: standard for recessed liner NO. A B D E F G CAP SCREW R
mounting; tall for projected head-liner mounting. Use with a RK-01 7/16 5/16 3/16 1/8
Socket-Head Cap Screw. 3/4 5/4 1/4-20 5/16
RK-02 1/2 3/8 1/4 3/16
RK-03 5/8 1 3/4 3/8 5/16 3/16 5/16-18 3/8
RK-04* 11/16 1-1/8 3/4 7/16 5/16 7/32 3/8-16 3/8
RK-05* 1/2 1/4
PROJECTED MOUNTING (INCH)
RK-10 7/32
7/16 3/8 3/16
RK-11 1/4
3/4 5/8 1/4-20 5/16
RK-12 1/2 1/2 1/4 5/16
RK-13 3/8
Standard Projected RK-14 5/8 1 3/4 1/2 5/16 3/8 3/8-16 3/8
Mounting Mounting * For extended-range bushings.

FLAT CLAMPS

STANDARD MOUNTING (INCH)
NO. H
Use to lock FM-type fixed-renewable bushings which have a milled PART OF SOCKET-HEAD
locking flat. Available in two heights: standard for recessed liner NO. HOLES A B D E F G CAP SCREW
mounting; tall for projected head-liner mounting. Use with one or FC-01 1/2 7/8 5/8 5/16 3/16 1/8 1/4-20
two Socket-Head Cap Screws. FC-02 1 1 1/4 5/16-18
5/8 1 3/8 3/16
FC-03 1-1/8 5/16
FC-04* 1 1-1/4 3/8 7/32
FC-05* 2 51/64 1-11/64 1-3/4 27/64 3/8-16
FC-06* 1 1-1/4 1/2 1/4 13
FC-07* 2 1-3/4
PROJECTED MOUNTING (INCH)
FC-10 1 1/2 7/8 5/8 3/8 3/16 7/32 1/4-20
FC-11 1/4
FC-12 5/16
Standard Projected FC-13 1 5/8 1 1 1/2 1/4 3/8 5/16-18
Mounting Mounting * For extended-range bushings.

www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 581