Page 65 - 2017 Product Guide

INSULATION | ECONOSCREED

Fast track top screed replacement
Econoscreed cement bonded panels are a
universal fast track dry floor preparation
method, to be used as a screed replacement
system over various structural substrates.

5 Reasons to choose Econoscreed
• 12mm non flammable cement boards
• Very low heat resistance - TOG 0.4
• Highly resistant to mechanical damage
• Moisture resistant - use in wet rooms
• Effective screed replacement system

Fast track floor finish
Econoscreed is a fast track floor finish for use
under many floor coverings including solid
timber (glue fix), ceramic tiles, sheet vinyl,
luxury vinyl tiles, carpet tiles, cork, linoleum
or rubber. When installing vinyl, cork, linoleum
or rubber, a fibre reinforced feather finish needs
to be applied on top of the Econoscreed to
smooth out any joints.
Yes! A floating floor you can glue timber onto, or tile on!

Econoscreed high performance cement board overlay system Only 12mm thick
The twin layers (6+6 mm) of Econoscreed,
STOCK DESCRIPTION BOARD SIZE UNIT RRP EXCL RRP INCL provided with interactive adhesive, utilise
NO M $ $
an overlap joint configuration to produce a
5423 12mm Cement Board Heating Overlay 1.2 x 0.6 Pair 90.00 99.00 seamless surface, immediately ready to
receive a floor covering.
Econoscreed boards are sold in pairs including 1 top board and 1 base board. A pair of boards covers 0.72m .
2

Installation method
1. Loose lay the Rigid Insulation Board
2. Roll out the Thermofoil heating mat
3. Lay Econosoft
4. Put down the first layer of Econoscreed
5. Lay second layer of Econoscreed
with overlapping joints by half
a board in both directions
6. Install your floor finish

Ideal for glued down timber floors
Econoscreed is ideally suited in applications
where engineered timber floor finishes are to be
glued down.

Packaging information
• Available for purchase by the m².
• 1 pallet = 100 boards (36m²).
• Pallet weight = 750kg

FREE DELIVERY ON ALL ORDERS OVER $250.00 RRP E&OE ©THERMOGROUP 65