Page 118 - E24 Electrical Notebook

114 - Underfloor Heating & Ramp Heating - Product Selection

Selecting Underfloor Heating System Project Design

Select the right underfloor heating system using the table below: Our design software will provide key information for your client and for
your contractor:
Overfloor Area T2 Product Extra Features
• Complete bill of materials
Tiles Dry Areas T2Reflecta Exceptionally fast heat-up time. Energy • Installation plan (2D & 3D version)
T2Red Saving. Even heating distribution • Product part numbers for easy quotation request
(Kitchen, entrance hall, T2QuickNet-90 • Circuit sizes & layout
living room, bedroom & T2QuickNet-Plus-160 Adjusts heat output • Heat outputs per area
bathroom) For renovation (thin extra layer)
T2Blue-10W
For renovation (thin extra layer). For fast
T2Blue-20W heat-up or poorly insulated under floors

Pre-terminated, flexible & robust heating
cable for flexible design

Pre-terminated, flexible & robust heating
cable for fast heatup requirements

CeraPro Ultra thin (3mm) & robust heating cable
for undertile applications. For installation
directly into tile adhesive (thin profile
installation). Excellent for renovation
projects

Wet Areas T2QuickNet-90 For renovation (thin extra layer)
T2QuickNet-Plus-160
(Walk-in shower, T2Red For renovation (thin extra layer).
swimming pool areas, T2Blue-10W For fast heat-up or poorly insulated
etc) T2Blue-20W under floors or for higher temperature

Adjusts heat output

Pre-terminated, flexible & robust heating
cable for flexible design

Pre-terminated, flexible & robust heating
cable for fast heatup requirements

Wood / Laminate / Dry Areas CeraPro Ultra thin (3mm) & robust heating cable
Plastic / Carpet for undertile applications. For installation
T2Reflecta directly into tile adhesive (thin profile
T2Red installation). Excellent for renovation Typical 2D Installation Plan
projects

Exceptionally fast heat-up time.
Even heating distribution

Adjusts heat output

Power Output Requirements Building Regulation Compliance Information

Ensuring the heated floor reaches a comfortable, efficient, and safe Raychem floor heating systems are designed to enable Part L compliance

temperature is an important requirement of the building regulations. in conjunction with Raychem zone controls and suitable floor insulation.

Raychem's SlabHeat software is a surface heating output modelling tool For compliance, support and further information on the new 2010 Building
providing finite element analysis of the floor surface. The actual floor profile Services Compliance Guide, please contact us on 0800 969 013.

can be modelled to ensure the correct surface temperature is achieved. Raychem Ramp Heating

Product Data Sheets For a complete guide to ramp and surface heating systems, please

Full product specification and data sheets are available at: contact Pentair Thermal Management on 0800 969 013 and request our

www.raychemfloorheating.com new ramp heating technical handbook (document reference CDE-1540)

available free of charge. Temperature (ºC)

0 Node Location (mm) 42.54 30.24
0 42.13 29.83
5 50 100 41.72 29.42
10 41.31 29.01
15 0 40.90 28.59
20 40.49 28.18
25 5 40.08 27.77
30 39.67 27.36
35 10 39.26 26.95
40 38.85 26.54
45 15 38.44 26.13
50 38.03 25.72
Slab Depth (mm) 55 20 Slab Depth (mm) 37.62 25.31
60 37.21 24.90
25 36.80 24.49
0 36.39 24.08
30 35.98 23.67
35.57 23.26
35 35.16 22.85
34.75 22.44
40 34.34 22.03
33.93 21.62
45 33.52 21.21
33.11 20.80
50 32.70 20.39
32.29 19.98
55 31.88 19.57
31.47 19.16
60 31.06 18.75
30.65 18.34
50 100

Node Location (mm)

For a FREE SlabHeat report call 0800 969 013
(Please mention that you have seen the Electrical Engineers’ Notebook)

Pentair Thermal Management Tel : 0800 969 013
3 Rutherford Road Fax : 0800 968 624
Stephenson Industrial Estate
Washington www.pentairthermal.co.uk
Tyne & Wear NE37 3HX www.raychemfloorheating.com