Page 37 - CloudCuddle Handleiding

EN EN

6. Push as much air as possible out of the tubes by rolling up the CloudCuddle, starting at D. Washing the CloudCuddle D.
the end of the legs. Make sure the leg with the open air valve remains free, otherwise
the air cannot escape. If necessary, watch the instruction video on the website (under Did a small accident happen, and is only the fitted sheet dirty? You can wash the sheet.
‘product/use’). 1. Unzip the fitted sheet and remove it from the CloudCuddle. This can be done from
the bottom of the sheet (view photo 32) (N.B.: the instruction video on the website
7. Place the product flat, with the mesh and the tubes at the top and the mattress cover accidentally shows the zipper runner at the top). You should first remove the
at the bottom. Grab one of the ‘socks’ of the CloudCuddle and place it in the corner of CloudCuddle from the mattress.
the mattress cover (view photo 27). Repeat this step for the other three socks.
2. Wash the sheet according to the instructions on the care label.
8. Next, fold the mattress cover inwards (view photo 28).
Photo 26: release straps. Photo 27: place every sock in corner of cover. 3. If you have an extra zippered CloudCuddle sheet, you can place this now. Photo 32: wash sheet: unzip from the underside of Photo 33: Ganze CloudCuddle waschen: entleeren und
9. Fold both sides lengthwise towards the middle. The mesh and the tubes are now more sheet! Rohren entfernen.
or less packaged within the mattress cover (view photo 29). The CloudCuddle is now Large accident? You can wash the entire CloudCuddle.
optimally protected during transportation and storage. 1. Deconstruct the CloudCuddle as described at chapter II, C: Deconstruct the
CloudCuddle, up to step 6.
10. (Tightly) roll the CloudCuddle and place it back in a bag (view photos 30 and 31).
2. Open the zipper on the cover and remove the black, inflatable tubes (view photo 33).

3. Make sure all zippers and click buckles are closed before washing.

4. Place the CloudCuddle in the laundry machine and wash it according to the
instructions on the washing label. You can unzip the fitted sheet and wash it separately
at a higher temperature.
Photo 28: cover and mesh on top. Photo 29: fold lenghtwise. Photo 34: place tubes all the way into the socks. Photo 35: seam of tube parallel to zipper.
5. The CloudCuddle cover cannot be machine dried. The sheets can.
6. As soon as the cover is clean and dry again, you can place the inflatable tubes back in
the cover. Start with the leg containing the valve. The corresponding white sock has a
hole for the valve.
7. Fully unzip the cover and place the black, inflatable tube in the cover (view photo 20).
Place the bottom of the inflatable tube all the way into the white sock (view photo
34).

8. Make sure the seam of the inflatable tube is against the zipper of the tube cover (view
photo 35). Zip up the cover. Continue setting up the CloudCuddle as described in
Photo 30: roll up CloudCuddle. Photo 31: place in bag, never together with pump. chapter II, B: Setting up the CloudCuddle.

34 35