Page 207 - Template Tesis UTM v2.0

I., “Damage in flax/epoxy quasi-unidirectional woven laminates under quasi-

static tension,” J. Compos. Mater., 2015. 49(4): 403–413.
144. Santulli, C., Sarasini, F., Tirillò, J., Valente, T., Valente, M., and Caruso, A. P.,

“Mechanical behaviour of jute cloth/wool felts hybrid laminates,” Mater. Des.,
2013. 50: 309–321.

145. Dehkordi, M. T., Nosraty, H., Shokrieh, M. M., Minak, G., and Ghelli, D., “Low
velocity impact properties of intra-ply hybrid composites based on basalt and

nylon woven fabrics,” Mater. Des., 2010. 31(8): 3835–3844.

146. Agrawal, S., Singh, K. K., and Sarkar, P., “Impact damage on fibre-reinforced
polymer matrix composite - A review,” J. Compos. Mater., 2013. 48(3): 317–

332.
147. Zhang, Y., Li, Y., Ma, H., and Yu, T., “Tensile and interfacial properties of

unidirectional flax / glass fiber reinforced hybrid composites,” Compos. Sci.
Technol., 2013. 88: 172–177.

148. Braga, R. A. and Magalhaes Jr., P. A. A., “Analysis of the mechanical and

thermal properties of jute and glass fiber as reinforcement epoxy hybrid
composites,” Mater. Sci. Eng. C, 2015. 56: 269–273.

149. Mat Jusoh, M. S., Santulli, C., Yahya, M. Y., Hussein, N. I. S., and Israr Ahmad,

H. A., “Effect of stacking sequence on the tensile and flexural Properties of glass
fibre epoxy composites hybridized with basalt , flax or jute fibres,” Mater. Sci.

Eng. with Adv. Res., 2016. 1(4): 19–25.
150. Èerný, M., Glogar, P., Goliáš, V., Jakub Hruška, P. J., and Sucharda, Z.,

“Comparison of mechanical properties and structural changes of continuous
basalt and glass fibres,” Ceram. − Silikáty, 2007. 51(2): 82–88.

151. Ary Subagia, I. D. G., Kim, Y., Tijing, L. D., Kim, C. S., and Shon, H. K., “Effect

of stacking sequence on the flexural properties of hybrid composites reinforced
with carbon and basalt fibers,” Compos. Part B Eng., 2014. 58: 251–258.

152. Ramesh, K. T., “High Strain Rate and Impact Experiments,” in Handbook of
Experimental Solid Mechanics. United States: Springer. 1-30; 2008.

153. Zhang, J., Chaisombat, K., He, S., and Wang, C. H., “Hybrid composite
laminates reinforced with glass/carbon woven fabrics for lightweight load

bearing structures,” Mater. Des., 2012. 36: 75–80.

154. Baets, J., Plastria, D., Ivens, J., and Verpoest, I., “Determination of the optimal
flax fibre preparation for use in unidirectional flax–epoxy composites,” J. Reinf.

173