Page 204 - Template Tesis UTM v2.0
P. 204

2011. 46: 1056–1065.

                   110.  Tarfaoui,  M.,  Choukri,  S.,  and  Neme,  A.,  “Effect  of  fibre  orientation  on
                         mechanical properties of the laminated polymer composites subjected to out-of-

                         plane  high  strain  rate  compressive  loadings,”  Compos.  Sci.  Technol.,  2008.
                         68(2): 477–485.

                   111.  Daryadel, S. S., Mantena, P. R., Kim, K., Stoddard, D., and Rajendran, A. M.,
                         “Dynamic  response  of  glass  under  low-velocity  impact  and  high  strain-rate

                         SHPB compression loading,” J. Non. Cryst. Solids, 2016. 432: 432–439.

                   112.  Akil, H., Arifin, Z., Firdaus, M., Hui, O., and Hui, D., “Measurement on the
                         dynamic properties of nanosilica/polypropylene composite using split hopkinson

                         pressure bar technique,” School of Materials & Mineral Resources Engineering,
                         Universiti Sains Malaysia, 2010. 1–3.

                   113.  Firdaus,  M.,  Akil,  H.,  Arifin,  Z.,  Mazuki,  A.  A.  M.,  and  Yokoyama,  T.,
                         “Dynamic properties of pultruded natural fibre reinforced composites using Split

                         Hopkinson Pressure Bar technique,” Mater. Des., 2010. 31: 4209–4218.

                   114.  Omar, M. F., Akil, H. M., and Ahmad, Z. A., “Measurement and prediction of
                         compressive properties of polymers at high strain rate loading,” Mater. Des.,

                         2011. 32: 4207–4215.

                   115.  Omar, M. F., Akil, H. M., and Ahmad, Z. A., “Static and dynamic compressive
                         properties of mica/polypropylene composites,” Mater. Sci. Eng. A, 2011. 528(3):

                         1567–1576.
                   116.  Abdul Wahab, N. S., Omar, M. F., Md Akil, H., Ahmad, Z. A., and Zulkepli, N.

                         N.,  “Effect  of  surface  modification  on  rice  husk  (Rh)/linear  low  density
                         polyethylene  (Lldpe)  composites  under  various  loading  rates,”  Mater.  Sci.

                         Forum, 2016. 840: 3–7.

                   117.  Govender, R. A., Louca, L. A., Pullen, A., Fallah, A. S., Nurick, G. N., and
                         Gerlach, R., “Determining the through-thickness properties of thick glass fiber

                         reinforced  polymers  at  high  strain  rates,”  J.  Compos.  Mater.,  2011.  46(10):
                         1219–1228.

                   118.  Song, Z., Wang, Z., Ma, H., and Xuan, H., “Mechanical behavior and failure
                         mode of woven carbon/epoxy laminate composites under dynamic compressive

                         loading,” Compos. Part B Eng., 2014. 60: 531–536.

                   119.  Song,  B.,  Chen,  W.,  and  Weerasooriya,  T.,  “Quasi-static  and  dynamic
                         compressive  behaviors  of  a  S-2  glass/SC15  composite,”  J.  Compos.  Mater.,

                                                           170
   199   200   201   202   203   204   205   206   207   208   209