Page 205 - Template Tesis UTM v2.0

2003. 37(19): 1723–1743.

120. Tsai, J. L. and Huang, J. C., “Strain rate effect on mechanical behaviors of nylon
6-clay nanocomposites,” J. Compos. Mater., 2006. 40(10): 925–938.

121. Haque, A. and Ali, M., “High strain rate responses and failure analysis in
polymer matrix composites - An experimental and finite element study,” J.

Compos. Mater., 2005. 39(5): 423–450.
122. Pankow, M., Attard, C., and Waas, A. M., “Specimen size and shape effect in

split Hopkinson pressure bar testing,” J. Strain Anal. Eng. Des., 2009. 44(8):

689–698.
123. Jackson, M. and Shukla, A., “Performance of sandwich composites subjected to

sequential impact and air blast loading,” Compos. Part B Eng., 2011. 42(2): 155–
166.

124. Lee, O. S. and Kim, M. S., “Dynamic material property characterization by using
split Hopkinson pressure bar ( SHPB ) technique,” Nucl. Eng. Des., 2003. 226:

119–125.

125. ASTM International. “Standard test method for tensile properties of plastics,”.
United States, ASTM D638-10. 2010.

126. ASTM International. “Standard test methods for flexural properties of

unreinforced and reinforced plastics and electrical insulating materials,”.
United States, ASTM D790-03. 2003.

127. ASTM International. “Standard test method for measuring the damage
resistance of a fiber-reinforced polymer-matrix composite to a concentrated

quasi-static,”. United States, ASTM D6264-6264M-12. 2012.
128. Azwan, S. M. S., Yahya, Y., Ayob, A., and Abdi, B., “Quasi-static flexural and

indentation behaviour of polymer-metal laminate,” Adv. Mater. Res., 2014. 970:

88–90.
129. Zhu, S. and Chai, G. B., “Damage and failure mode maps of composite sandwich

panel subjected to quasi-static indentation and low velocity impact,” Compos.
Struct., 2013. 101: 204–214.

130. Caprino, G., Lopresto, V., Langella, A., and Leone, C., “Damage and energy
absorption in GFRP laminates impacted at low-velocity: Indentation model,”

ICM11. 2011. Italy: Procedia Engineering. 2011. 2298–2311.

131. Chen, P., Shen, Z., Xiong, J., Yang, S., Fu, S., and Ye, L., “Failure mechanisms
of laminated composites subjected to static indentation,” Compos. Struct., 2006.

171