Page 697 - US ACCESSORIES GUIDE (2019)

STEERING

BRACKET-KICKER ENGINE ATTACHMENT 175HP+ KICKER ELECTRICAL KIT

8M0149838
This system allows you to run your kicker engine and use the power steering
system without your primary engine running. This system allows you to connect to
a deep cell battery (not your starter battery) and the system will provide normal
power steering from the wheel. The system will alert you when your auxiliary
battery is below 9.5 volts. This signal means that you must start your primary
engine to change the battery system. This kit will save the starting battery for
primary starting use only. Must select the appropriate isolator to be paired with this
system, dependent on engine configuration.
892822A02 175hp+ power steering systems with a kicker engine. 200‑350 Verado 2015 (Gen
Unique bracket used to hook up a kicker engine with Verado. Special bracket is 5) and newer and all 175‑300hp 3.4L and 4.6L engines.
attached to Verado engine to allow attachments.
2005 Verado Engines 200‑300 HP HYDRAULIC STEERING - BASIC AND HEAVY DUTY
KICKER ENGINE BRACKET SYSTEMS
8M0097850
Bracket is used to mount a kicker engine with a Verado engine. Both the Basic and the Heavy Duty Hydraulic Systems in this section
Bracket is used on Gen 5 Verado engines will use the hoses listed. (8M0053474 to 8M0053492) Note that the
TROLLING MOTOR TIE BAR KIT WITHOUT DRIVE UNIT Basic is for single engines only ‑ 150 HP and below. The Heavy Duty
systems are for single engines above 150 HP as well as multiple
engines. Fittings are listed in this section that can be installed to the
STEERING compression style connections.
CYLINDER - HYDRAULIC - STANDARD

8M0141911
This Basic hydraulic cylinder has the same robust performance design requirement
as our heavy duty cylinder. It is qualified to the same 300,000 cycle as our other
67-892763A24 steering systems, has high strength fasteners, stainless steel arm, heavy duty triple
Heavy duty auxiliary steering kit connects an auxiliary trolling motor to your main seal cartridges for enhanced duribilty and longevity high quality fittings using
swaged compression style hose connections.
motor. It is 1/2 inch thick. Ideal for large Walleye/ Great Lakes boats with rough
water running conditions All Single Outboard ‑ 150 HP and below
(1.5L Opti engine requires the special arm ‑ cylinder 8M0056619)
Panther Model 55‑2700
CYLINDER - HYDRAULIC - STANDARD
TROLLING MOTOR TIE BAR KIT

8M0056619
67-892763A14 This Basic hydraulic cylinder has the same robust performance design requirement
Heavy duty auxiliary steering kit connects an auxiliary trolling motor to your main as our heavy duty cylinder. It is qualified to the same 300,000 cycle as our other
motor. It is 1/2 inch thick. Drive bracket is 100% stainless steel. Ideal for large steering systems, has high strength fasteners, stainless steel arm, with a special
Walleye/ Great Lakes boats with rough water running conditions bend for clearance, heavy duty triple seal cartridges for enhanced duribilty and
longevity. High quality fittings using swaged compression style hose connections.
Panther Model 55‑2700 Mercury OB ‑ 1.5L OptiMax

684 Place Orders | Print Invoices | Register Product | Pay Online