Page 69 - Repower Reference Guide (2020) 8M0149179

ACCESSORY KITS FOR PLUS-SERIES ENGINES

RISER KIT RISER KIT - 6 IN.(152 MM)

864908A 1 98-8M0124068
6 in. (152 mm) for standard cooling and dry joint exhaust manifolds. This riser will raise the elbow an additional 6 in.(152 mm). If the engine has a 2 in.
Fits 2004‑2016 MCM V‑6 (s/n 0W310000 and up); 2002‑2016 MCM V‑8 (305, 350 (51 mm) elbow already on engine, but only needs an additional 4 in.(102 mm) rise,
& 377 cid) non‑EC engines (s/n 0M615000 and up) & MIE V‑8 (350 & 377 cid) this kit will not work. Order 862354A 1 Exh. Elbow/Riser kit instead.
non‑EC engines (s/n 0M390000 and up). Fits MCM/MIE 8.1L & 8.2L non‑EC engines
EXHAUST ELBOW KIT - 2 IN.(51 MM) EXHAUST ELBOW/RISER KIT - 8 IN.(203 MM)

MERCRUISER

862974A05 98-8M0124069
This elbow is 2 in.(51 mm) higher than the standard elbow. This replaces what was If the engine has a standard rise elbow already on engine and needs another 8 in.
the 3 in.(76 mm) riser kit used on previous big block engines. (203 mm) rise, order this kit. The standard rise elbow is removed and replaced with
Fits MCM/MIE 8.1L & 8.2L non‑EC engines a 2 in.(51 mm) rise elbow and a 6 in.(152 mm) riser kit which are included in this
kit.
EXHAUST ELBOW/RISER KIT - 6 IN.(152 MM) Fits MCM/MIE 8.1L & 8.2L non‑EC engines
INTERMEDIATE ELBOW KIT

862354A04
Order this kit if the engine has a 2 in.(51 mm) elbow already installed on it, but only
needs an additional 4 in.(102 mm) rise. The 2 in.(51 mm) elbow is removed and 14865A02
replaced with the standard rise elbows and a 6 in.(152 mm) riser kit which are Only required on sterndrive engines that have the exhaust going through the prop.
included in kit. Fits MCM V‑6 with 2 piece exhaust manifolds and 3 in. (76 mm) risers ‑ s/n
Fits MCM/MIE 8.1L & 8.2L non‑EC engines 0W309999 and below
INTERMEDIATE ELBOW KIT

14801A 1
Only required on sterndrive engines that have the exhaust going through the prop.
Fits MCM V‑8 (305, 350 & 377 cid) engines (0W309999 and below)

52