Page 190 - Latin America Accessories Guide (2020) - 8M0163252

MERCRUISER

WATER ELIMINATOR FUEL FILTER KIT

Uses polymer crystals encased in a plastic filter to absorb water from FUEL FILTER KIT
the fuel in a fuel tank. Supplied with a 2 ft.(610 mm) lanyard. Sold in
counter display box. Approximate dimensions: 3‑1/2 in.(89 mm) a 1‑1/4
in.(32 mm).

WATER ELIMINATOR

35-864572A 1
Prevents blockage of the boost pump inlet from debris that may be in the fuel tank.
This filter is installed in‑line between the fuel tank and boost pump. Standard
equipment with all current engines using a boost pump. This filter will backfit older
MerCruiser 8.1S/496 Mag engines.
Fits all MCM/MIE gasoline engines using a boost pump.
67-808887Q
Contains a drying agent commonly used to keep small, sealed containers dry. It FUEL FILTER
absorbs water that has collected in the fuel tank.
How to use: Attach to the inside fuel cap with the lanyard (included). Adjust the
lanyard so the Water Eliminator sits at the bottom of the fuel tank. Replace as
needed.
For use in all octane grades of gasoline, including ethanol blended. Not MERCRUISER
recommended for diesel fuel.
For use in all 2‑cycle and 4‑cycle gasoline outboard, sterndrive, inboard and jet
drive marine engines.
Priced individually, sold @ multiples of 6
Quicksilver Branded, Point of Sale Packaged.
BOOST PUMP KIT
35-864572
BOOST PUMP KIT
Replacement in‑line filter
Fits all MCM/MIE gasoline engines using a boost pump.
HIGH CAPACITY WATER SEPARATING FUEL
FILTER - GASOLINE OR DIESEL
WATER SEPARATING FUEL FILTER KIT

862264A 7
Helps minimize vapor locking
Fits MCM/MIE 4.3L, 5.0L, 5.7L & 6.2L EFI/MPI engines

35-8M0082291
High capacity water separating fuel filter kit allows for 120 gallons per hour fuel
flow. 10‑micron fuel filter with over 90% efficiency removes harmful contaminants,
particles and power robbing water from your fuel between your tank and the
engine. The filter in the kit contains more than 25% more filter media than
non‑Quicksilver filters. Internal epoxy coating and corrosion resistant external paint
for increased weather resistance.
For use with 2‑cycle and 4‑stroke outboards and both gasoline and diesel stern
drive and inboard engines. This kit includes the vessel mount head, without the
fittings. It can deliver high fuel volume flow for multiple outboard, stern drive or
inboard engine applications. Brass or stainless‑steel fuel line fittings sold
separately. Check your owner’s manual for inspection and replacement schedules.
Mercury Branded

2020 Mercury Precision Parts & Accessories Guide 181