Page 575 - Rigging and Accessories Guide (2022) - 8M0187689

OUTBOARD

FUEL CONNECTOR - ENGINE END 54- 41582Q 7 4.05
For use with our gray color, 5/16 in. (8 mm) I.D. fuel line.
Priced individually, sold @ multiples of 2
Quicksilver Branded, Clamshell Package Point of Sale Packaged.
WATER ELIMINATOR

Uses polymer crystals encased in a plastic filter to absorb water from
the fuel in a fuel tank.
WATER ELIMINATOR
F213238T2 15.05
Small inlet used on older style Force and Chrysler outboards.
Priced individually, sold @ multiples of 2
Mercury Precision Branded, Clamshell Package Point of Sale Packaged.
FUEL CONNECTOR - ENGINE END

67-808887Q 9.89
OUTBOARD Contains a drying agent commonly used to keep small, sealed containers dry. It
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
absorbs water that has collected in the fuel tank.
How to use: Attach to the inside fuel cap with the lanyard (included). Adjust the
lanyard so the Water Eliminator sits at the bottom of the fuel tank. Replace as
needed.
F213238Q2 15.05 For use in all octane grades of gasoline, including ethanol blended. Not
Small inlet used on older style Force and Chrysler outboards. recommended for diesel fuel.
For use in all 2‑cycle and 4‑cycle gasoline outboard, sterndrive, inboard and jet
Priced individually, sold @ multiples of 2 drive marine engines.
Quicksilver Branded, Clamshell Package Point of Sale Packaged. Priced individually, sold @ multiples of 6
FUEL LINE COUPLER Quicksilver Branded, Point of Sale Packaged.
WATER SEPARATING FUEL FILTERS AND KITS

For gasoline use ONLY, the element will remove unwanted water from
the fuel supply as it flows through the filter to the engine.
WATER SEPARATING FUEL FILTER KIT - FIRE
COMPLIANT

22-8M0001721 1.20
Barbed ends.
Provides for coupling Mercury .375 ID fuel line with Mercury .3125 ID fuel line.
Priced individually, sold @ multiples of 2
FUEL LINE SNAPPER CLAMP

8M0157707 79.55
Contains water separating fuel filter, water‑in‑fuel sensor, base, electrical harness,
2 barbed connectors, and 2 pipe plugs. This kit was designed to meet U.S Coat
Guard and ABYC H‑24 fuel‑system requirements. Also designed to meet 33 CFR
183.590 or ISO 10088 fire test.
Shipped standard with all FSM equipped 6‑cylinder Verado outboards, Gen 5 L6
Verado. It will also work with inboard vessels and vessels that have generator
applications. This is the only approved fuel filter kit that meets the fire test
regulations mentioned above.
54- 41582T 7 4.05
Fuel line hose clamp.
For use with our gray color, 5/16 in. (8 mm) I.D. fuel line.
Priced individually, sold @ multiples of 2
Mercury Precision Branded, Clamshell Package Point of Sale Packaged.

562 Place Orders | Print Invoices | Register Product | Pay Online