Page 681 - US ACCESSORIES GUIDE (2019)

ELECTRICAL

BATTERY BAR - MULTIPLE CONNECTOR BATTERY COVER - BLACK/NEGATIVE

BATTERY MULTIPLE CONDUCTOR KIT (WITH COVERS)
ELECTRICAL

898289046 5C34 8.90
WARNING: Cancer - www.P65Warnings.ca.gov
Negative (Black) Snap on cover used with Battery Bus Bar kits
Any 12 volt battery that uses the new Bus Bar Kit
898289Q45 61C64 102.73
WARNING: Cancer - www.P65Warnings.ca.gov BATTERY PLATE - 3/8 INCH (WITH FASTENERS)
New Battery Bus Bar Kit allows multiple connection points that result in clean and
direct connections for various electrical power needs. This will eliminate stacking
of ring terminals and reduce corrosion and loose connections resulting in poor or
faulty electrical connections.
Kit includes a 3/8 inch and a 5/16 inch mounting plate made of brass with all the
fasteners needed for multiple connections. This kit also includes a positive (red)
and negative (black) cover that snaps to the plate and provides protection to the
battery connections. (ABYC compliant)
Any 12 volt battery that has a 3/8 inch and 5/16 inch pmounting stud
BATTERY MULTIPLE CONDUCTOR KIT (NO COVERS)

898289A71 23C39 38.98
Multiple Conductor Battery Plate 3/8 inch (with fasteners) Clean up your battery
solutions with direct isolated connections
BATTERY PLATE - 5/16 INCH (WITH FASTENERS)
898289A48 32C48 54.13
Multiple Conductor Battery Plate with fasteners (No Covers)
Clean up your battery solutions with direct isolated connections

BATTERY ISOLATORS
898289T47 57C27 95.45
New Battery Bus Bar Kit allows multiple connection points that result in clean and Multi‑battery drain occurs when there are two or more batteries in a
direct connections for various electrical power needs. This will eliminate stacking charging system. Without a battery isolator, accessories attached to one
of ring terminals and reduce corrosion and loose connections resulting in poor or
faulty electrical connections. battery will draw power from all other batteries in the circuit, leaving
Kit includes a 3/8 inch and a 5/16 inch mounting plate made of brass with all the them seriously rundown, or even dead. The Quicksilver Battery Isolator
fasteners needed for multiple connections. This kit does not include plastic snap is an electric current controlling device which isolates each battery in
on covers (ABYC compliant) the circuit. Each battery then discharges and charges accordingly.
Any 12 Volt battery with 3/8 inch and 5/16 inch studs Never does the load on one battery drain power from other batteries in
the system.
BATTERY COVER - RED/POSITIVE
BATTERY ISOLATOR - 80 AMP

898289045 5C34 8.90
Positive(Red) Snap on cover used with Battery Bus Bar kits 87-8M6005583 95C44 159.07
Any 12 volt battery that uses the new Bus Bar Kit
80 amp battery isolator. Ensure battery cables meet ABYC/CFR regulations.
All MerCruiser and Outboard engines.

668 Place Orders | Print Invoices | Register Product | Pay Online