Page 231 - OEM RIGGING AND ACCESSORIES GUIDE (2021) - 8M0174477

ELECTRICAL

POWER TRIM SWITCH KIT TROLL CONTROL- DASH MOUNTED- ANALOG
87-8M0083439 87.64
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Troll Control will allow you to have the same functions that you get from the
SmartCraft Digital gauges and adjust the speed of the boat. By pushing the button
up or down, you can feather your speed every 10 RPM. Go from idle to 1000 RPM
or anywhere in between. (some engine can actually go lower than idle (75‑115 4
stroke(Walleye), 135‑200 HP Verado 4 cylinder and 3.0L Optimax) This kit will be
used in analog gauge installations. RPM will reset to idle when more than 2‑3%
movement occurs at the throttle (TPS)
Can be used with any Analog Gauge installation without a J Box. "Y" harness is
included in kit to connect to main engine hanress. This kit can be used with any
SmartCraft compatable Mercury Engine.
87- 18286A46 42.49 TROLL CONTROL Y HARNESS
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Rocker switch style with 25 ft.(7.62 m) harness and bullet connectors. Can be
surface mounted or flush mounted. Provides tilt control from the bow or transom
location.
Fits Mercury/Mariner 75‑115 hp. FourStroke outboards beginning with serial
number 1B366823‑2B094955.
TRIM LIMIT SWITCH KIT

ELECTRICAL Y hareness allows you to connect direct to main engine harness and the 25.98
84-8M0042976
Troll Control kit without using a "J" box.
Used with Troll Control Kit 879365K08 (879365A08)
TROLL CONTROL KIT

87-814407A 3 68.85
WARNING: Cancer - www.P65Warnings.ca.gov
Kit includes a mercury switch to limit power trim travel and a new, shorter tilt
bracket.
Fits all Mercury/Mariner V‑6 outboard applications which use engine mounted
power trim solenoids.
TROLL CONTROL

TROLL CONTROL- DASH MOUNTED- J BOX 87-8M0083437 52.46
SMARTCRAFT INSTALLATIONS WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
RPM adjustment at your finger tips. This kit can be added to the Big Tiller
Mechanical without P/S as an option

POWER TRIM EXTENSION HARNESSES

Plugs into remote control or trim panel with 3 blade connectors.
POWER TRIM EXTENSION HARNESS

87-8M0083438 76.03
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Troll Control will allow you to have the same functions that you get from the
SmartCraft Digital gauges and adjust the speed of the boat. By pushing the button
up or down, you can feather your speed every 10 RPM. Go from idle to 1000 RPM
or anywhere in between. (some engine can actually go lower than idle (75‑115 4
stroke(Walleye), 135‑200 HP Verado 4 cylinder and 3.0L Optimax) This kit will be
used in Smartcraft gauge installations that have a J Box installed. . RPM will
reset to idle when more than 2‑3% movement occurs at the throttle (TPS)
Can be used with any Analog Gauge installation without a J Box. "Y" harness is
included in kit to connect to main engine hanress. This kit can be used with any
SmartCraft compatable Mercury Engine.
46838A 4 25.72
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
10 ft.(3.05 m) harness and 3 blade connectors.
Fits Mercury/Mariner and MCM models with power trim.

218 Place Orders | Print Invoices | Register Product | Pay Online