Page 69 - Mercury Service Tool Guide (2020) - 8M0163249

DIESEL ENGINE

CAM BUSHING INSTALLER CRANK HANDLE

91-8M0111339
Use in conjunction with drive handle (P/N 8M0111344) to remove and install cam 91-8M0112720
bushings. Use in conjunction with pinion (P/N 8M0112721) to rotate engine.
MANDREL HANDLE PINION

91-8M0112721
91-8M0111344 Use in conjunction with crank handle (P/N 8M0112720) to rotate engine.
Use in conjunction with cam bushing installer (P/N 8M0111344) to remove and
install cam bushings. ENGINE SLING
ENGINE COMPRESSION TESTER

91-8M0112722
Aids in removing or installing the engine.
91-8M0111345
Use to check the compression on diesel engines. TDC LOCATING TOOL
91-8M0112723
REVOLVING ENGINE STAND Use to lock the engine in the top dead center (TDC) position.
91-8M0112718
Use in conjunction with brackets (P/N 8M0112725) to rotate engine. SEAL REMOVER
BRACKETS-REVOLVING ENGINE STAND
DIESEL ENGINE Use in conjunction with revolving engine stand (P/N 8M0112718) to rotate engine.
91-8M0112725
OIL FILTER WRENCH

91-8M0112726
Use to remove front cover seal.
6.7L Diesel Engine
DIAL INDICATOR BASE

91-8M0112727
Use in conjunction with dial indicator (P/N 8M0116621) to obtain precise
measurements during the assembly process.
DIAL INDICATOR
91-8M0112719 91-8M0116621
Use to remove or install an oil filter. Gauge range is 0‑5 mm (0‑0.196 in.)
DIAL INDICATOR HOLDER
91-8M0112729
Use in conjunction with dial indicator (P/N 8M0116621) to measure injection pump
timing during the assembly process.
62 Place Orders | Print Invoices | Register Product | Pay Online