Page 314 - REPOWER REFERENCE GUIDE (2020)

Shift and Throttle Cable Installation

Without shift assist assembly
a - Remote control shift cable
b - Clevis pin
c - Cotter pin (existing) (not shown)
d - Spring (existing) (not shown)
d f e - Washer (existing)
f - Washer
e g - Spacer
a g h - Washer (existing)
i - Cotter pin (existing)
c

i
h

b 7841

Bravo Shift Cable Installation and Adjustment

Bravo Models Shift Cable Installation
NOTE: Bravo Models Only: Using shift cable adjustment tool (91‑12427), shift cables can be adjusted with or without the
sterndrive installed, using the following procedure.

Shift Cable Adjustment Tool 91‑12427
IMPORTANT: Sterndrive propeller rotation is determined by the shift cable installation in the remote control.
• Bravo One/Two ‑ If the shift cable end guide moves in direction A when the control lever is placed in FORWARD, the
remote control is set up for RIGHT‑HAND (RH) propeller rotation.
• Bravo One/Two ‑ If the shift cable end guide moves in direction B when the control lever is placed in FORWARD, the
remote control is set up for LEFT‑HAND (LH) propeller rotation.
A

B 21620

Arrow indicates direction of motion
• Bravo Three ‑ Front propeller on sterndrive is always LH Rotation and rear propeller is always RH Rotation. The shift cable
end guide must move in direction A, when the control lever is placed in the FORWARD gear position.
A

21621
IMPORTANT: When installing shift cables, ensure that the cables are routed in such a way as to avoid sharp bends and/or
contact with moving parts. Do not fasten any items to the shift cables.

Page 9A-6 © 2019 Mercury Marine 90-8M0149179 eng NOVEMBER 2018