Page 22 - Installation Manual - GenII DTS

Console Mount ERC—Dual Handle (Standard)
9. Adjust the handle friction and detent as required, using the supplied hex wrench and the adjustment screws at the front of
the ERC.

b b a - Detent adjustment screws
b - Handle friction adjustment screws
a a

71263
10. Install the access cover onto the ERC.

a a - Hook on the access cover
b - Slide hook into the ERC body
c - Pivot the access cover downward to snap into
b place

c

71818
11. Snap the port and starboard accent covers onto the ERC.

a a - Port accent cover
b - Starboard accent cover
b

71817
NOTE: If either of the accent covers must be removed:
1. Use a small flat‑blade screwdriver or equivalent tool to pry around the perimeter of the cover, separating the cover from the
ERC plastic housing. Use care to not mar the ERC.
2. Discard the used accent cover and replace it with a new one.

Page 2C-4 © 2021 Mercury Marine 90-8M0161677 eng MARCH 2021