Page 87 - LATIN AMERICA ACCESSORIES GUIDE (2019) English

OUTBOARD

PRIMER BULB ASSEMBLY
FUEL LINES AND PRIMER BULBS - (NON-US
COMPLIANT)

These assemblies may be used in all applications not governed by the
US‑EPA 2011 regulations. If those regulations do apply, please refer to OUTBOARD
a 2011 US Compliant Section either here or in an Accessories Guide for
applicable assemblies complete with provision for a pressurized fuel
tank and low permeation primer bulb.

8 FT. FUEL LINE ASSEMBLY

8M0052976
Using materials resistant to the chemistry of today's fuels, this bulb is designed to
remain pliable longer. Two hose clamps are included. Mercury/Quicksilver bulbs
will have the molded EPA compliance statement "EPA‑MERC‑PB15". Bulbs will
perform at ‑15 Degrees C (5 Degrees F) after 6 weeks of exposure to fuel.
This bulb is a 2011 EPA Certified low permeation bulb. For use with 1/4 in. (6.35
mm) I.D. fuel line.
Priced individually, sold @ multiples of 4
Mercury Branded, Box Point of Sale Packaged.
8M0052975
Using materials resistant to the chemistry of today's fuels, this bulb is designed to 32-8M0054323
remain pliable longer. Two hose clamps are included. Mercury/Quicksilver bulbs Low Permeation (EPA compliant) hose has 1/8" NPT threaded fitting on engine end
will have the molded EPA compliance statement "EPA‑MERC‑PB15". Bulbs will and 1/4" NPT threaded fitting on the tank end. A non‑EPA compliant primer bulb is
perform at ‑15 Degrees C (5 Degrees F) after 6 weeks of exposure to fuel. included in this 8 ft. (2.44 m) assembly.
This bulb is a 2011 EPA Certified low permeation bulb. For use with 1/4 in. (6.35 Fits varying applications using the older style twist type disconnects at the engine
mm) I.D. fuel line. end and either a bayonet or thread‑in fitting on the tank end. This assembly may
Priced individually, sold @ multiples of 4 be used in all applications not governed by US‑EPA 2011 regulations.
Quicksilver Branded, Box Point of Sale Packaged. Quicksilver Branded, Box Point of Sale Packaged.
PRIMER BULB ASSEMBLY 8 FT. FUEL LINE ASSEMBLY

8M0061876 32-8M0054324
Using materials resistant to the chemistry of today's fuels, this bulb is designed to Low Permeation (EPA compliant) hose has standard quick connect type fitting on
remain pliable longer. Two hose clamps are included. Only Mercury/Quicksilver engine end and 1/4" NPT threaded fitting on the tank end. A non‑EPA compliant
bulbs will have the molded EPA compliance statement "EPA‑MERC‑PB15". Bulbs primer bulb is included in this 8 ft. (2.44 m) assembly.
will perform at ‑15 Degrees C (5 Degrees F) after 6 weeks of exposure to fuel. Fits Force 40 hp. and larger (1993 and Newer), Force 9.9/15/25 hp. (1998) and all
This bulb is a 2011 EPA Certified low permeation bulb. For use with our gray color, Mercury/Mariner outboards using clip on type disconnect at engine ends and a tank
5/16 in. (8 mm) I.D. fuel line & 3/8" I.D. fuel line. with threaded fuel pickup fitting. This assembly may be used in all applications not
Priced individually, sold @ multiples of 4 governed by US‑EPA 2011 regulations.
Mercury Branded, Box Point of Sale Packaged. Quicksilver Branded, Box Point of Sale Packaged.
8M0061875
Using materials resistant to the chemistry of today's fuels, this bulb is designed to
remain pliable longer. Two hose clamps are included. Mercury/Quicksilver bulbs
will have the molded EPA compliance statement "EPA‑MERC‑PB15". Bulbs will
perform at ‑15 Degrees C (5 Degrees F) after 6 weeks of exposure to fuel.
This bulb is a 2011 EPA Certified low permeation bulb. For use with our gray color,
5/16 in. (8 mm) I.D. fuel line & 3/8" I.D. fuel line.
Priced individually, sold @ multiples of 4
Quicksilver Branded, Box Point of Sale Packaged.

2019 Mercury Precision Parts & Accessories Guide 77