Page 327 - 2018 Master Catalog

ALL WEATHER SEAL
CERAMIC ENGINE SEAL • Specially formulated to stop cooling system leaks when
• Works equally well in aluminum or cast-iron blocks antifreeze is present
• Does not work with antifreeze • Ideal for stopping radiator leaks and sealing cracked
• Stops cooling system leaks blocks in sub-freezing conditions
PART NO. DESCRIPTION PART NO. DESCRIPTION

35500 Ceramic Engine Seal. One pint plastic bottle 35520 All Weather Seal. One pint plastic bottle

OIL PUMP STUD KIT
DECK PLUG KIT CHEVROLET
Upper cylinder wall distortion is greatly reduced when
these 3/4” NPT plugs are installed in the water passage • Wet sump oil pump stud (7/16” x 3-3/16”) is
holes in the decks of Small Block and 90° V6 Chevy engines. manufactured from 4130 chrome moly steel
• Kit includes a nut and hardened/ground washer
PART NO. DESCRIPTION
PART NO. DESCRIPTION
37800 Plug Kit, Small Block and 90° V6 Chevy
38150 Oil Pump Stud Kit, SBC, BBC, and 90° V6 Chevy

WINDAGE TRAY MOUNTING
CHROME PLATED PIPE PLUGS STUD KIT - FORD
PART NO. DESCRIPTION Kits include quantity 4 of: studs, main cap
nuts, windage tray nuts, and 8 washers.
39152 3/8” NPT - 4 per pack
39153 1/2” NPT - 2 per pack PART NO. DESCRIPTION
39154 3/4” NPT - 2 per pack
38192 Windage Tray Mounting Stud Kit for #22935, Ford 351W, Ford 302R

OFFSET CYLINDER HEAD DOWELS BULLET NOSE CARBURETOR
Reposition the cylinder heads upwards on the block STUD KITS
(toward the lifter valley), moving valves away from
cylinder wall for improved intake flow. Kits include 4 studs, hardened flat washers,
and jam nuts.
PART NO. DESCRIPTION
PART NO. DESCRIPTION
37900 Big Block Chevy and Big Block Chrysler .030” offset
37920 Small Block Chevy and Small Block Chrysler .015” offset 37950 Fits carbs. with 1/2” thick flange base, 5/16”-18 and 24 x 1-3/8” long
37930 Small Block Chevy and Small Block Chrysler .030” offset 37960 Fits carbs. with 1/2” thick flange base w/ a 1” spacer or with one or two,
1/2” spacers, 5/16”-18 and 24 x 2-1/2” long
Fits carbs with 1/2” thick flange base w/ a 2” spacer or with three or four 1/2”
37961 thick spacers, 5/16”-18 and 24 x 3-1/2” long
EXTRA LONG BELLHOUSING
DOWEL PINS
• .625” diameter
• Two per package OIL PAN STUD KITS
• Fits virtually all GM V8 and V6 blocks PART NO. DESCRIPTION
PART NO. DESCRIPTION
38350 Oil Pan Stud Kit, Small Block and 90° V6 Chevy and Oldsmobile V8, Set of 18
37932 Bellhousing Dowel Pins, standard, 1.500” long 38541 Oil Pan Stud Kit, for Steel Fabricated GM LS oil pans
37934 Bellhousing Dowel Pins, .007 offset, 1.328” long
37936 Bellhousing Dowel Pins, .014 offset, 1.328” long
37938 Bellhousing Dowel Pins, .021 offset, 1.328” long OIL PAN FASTENER KIT

PART NO. DESCRIPTION

CHROME-MOLY HEAD BOLT 38361 Oil Pan Fastener Kit, BBC Race Pans
WASHERS
PART NO. DESCRIPTION SELF-LOCKING OIL PAN BOLTS
PART NO. DESCRIPTION
38300 7/16” - Small Block and 90° V6 Chevy, Pack of 34
38310 1/2” - Small Block and 90° V6 Chevy, Pack of 30
38550 Small Block and 90° V6 Chevy and Oldsmobile V8’s, For One-Piece Gaskets,
Fourteen 1/4”-20 x 3/4” and Four 5/16”-18 x 3/4” bolts
327