Page 332 - 2018 Master Catalog
P. 332
RADIATOR HOSE FILLERS
RACING RADIATOR CAPS PART NO. DESCRIPTION
PART NO. DESCRIPTION
63730 1-1/2” hose to 1-1/2” hose
63740 1-1/2” hose to 1-1/4” hose
63313 12-16 lbs.
63316 14-18 lbs. 63745 1-1/4” hose to 1-1/4” hose
63320 19-21 lbs.
63324 23-25 lbs.
63328 27-29 lbs. WATER OUTLET RESTRICTOR KIT
63332 31-33 lbs. Kit consists of three restrictor plates w/ 5/8”, 3/4”, and 1” I.D.
holes for optimum coolant flow, 2-1/8” O.D.
PART NO. DESCRIPTION
FILLER NECKS 63440 GM V8, GM V6, Ford 260-302, 351W
PART NO. DESCRIPTION
63473 Water Outlet - Chevy -16AN Male Fitting - Billet Aluminum, w/ O-Ring Seal CARBURETOR SAFETY PLATE
Water Outlet - Chevy -16AN fitting & (2) 3/8” NPT female ports -
63461 • Fits Holley® Dominator 4500-series Carbs
Billet Aluminum - Black, Gasket
63465 Stamped Aluminum Filler Neck - Chevy - Bolt-On - Black Anodized Alum. • • Steel, plated clear zinc
Prevents linkage that may become loose from
63466 Billet Aluminum Filler Neck - Chevy - Bolt-On
63467 Extended Filler Neck - SBC, BBC, & 90° V6 intake manifolds; Drag & Street use carburetor from falling into intake
63420 Filler Neck Manifold Housing - Chevy V8 & 90° V6 - Kit PART NO. DESCRIPTION
63423 Fillet Neck Manifold Housing - Chevy V8 & 90° V6 Intake Manifolds
63421 Filler Neck Manifold Housing - Billet Aluminum - 1” NPT - Chevy Pattern 64935 Carburetor Safety Plate, Dominator
63471 Water Neck Block-Off Plate - Chevy V8 & 90° V6
63455 Water Outlet Filler Neck - SB Ford - Bolt-On w/ -16AN Fitting - Anodized Alum.
63486 Billet Aluminum Filler Neck - Weld-On
CARBURETOR LINKAGE
BUSHING KIT
THROTTLE CABLE MANIFOLD PART NO. DESCRIPTION
MOUNTED CHEVY V6/V8
• Provides positive throttle return required by 64920 Carburetor Linkage Bushing Kit, Holley® 4-bbl carbs
several sanctioning bodies
• Each kit fits Holley® 2 or 4 bbl. single carb apps.
• Includes one set of return springs
PART NO. DESCRIPTION CARBURETOR
SPACERS
64925 SBC and 90° V6 Chevy heads, Manifold Mount, 5-7/16” Tall
64929 Optional Part: Throttle Return Spring PART NO. DESCRIPTION
64951 Billet Aluminum - 4500 - 1” Thickness - Open Plenum Design
64950 Cast Aluminum - 4500 - 1” Thickness - Open Plenum Design
THROTTLE RETURN 64930 Plastic - 4150/4160 - 1” Thickness - 4-Hole Plenum Design w/ 1.75” dia. bores
SPACING KIT - HOLLEY® SERIES 64940 Plastic - 4150/4160 - 1” Thickness - Open Plenum Design
PART NO. DESCRIPTION 64943 Phenolic - 4150/4160 - 1/2” Thickness - 4-Hole Plenum Design w/ 1.75” bores
64947 Phenolic - 4500 - 1/2” Thickness - Open Plenum Design
65015 Wood - 4150/4160 - 1/2” Thickness - Open Plenum Design
64923 Holley® 4500, Carb Mount 65016 Wood - 4500 - 1/2” Thickness - Open Plenum Design
64927 2300/4100 Holley® Series, Road, Speed, Race Demon™ Series Carb Mounts
64918 4500 Dominator and King Demon Carb Mounts
THROTTLE STOP FOR CARBURETOR ADAPTERS -
HOLLEY® CARBS ALUMINUM
• Throttle stop is adjustable, and simply mounts to PART NO. DESCRIPTION
the carb hold-down stud
• Made from rugged 1/8” steel with a clear zinc finish 3/4” Billet Aluminum, adapts Holley® 2300/2305 2-bbl. carbs to intake manifolds
• Fits both 1:1 and progressive throttle linkage 64965 with Holley® 4150/4160 4-bbl. bolt pattern; 2-hole plenum w/ 1.50” dia. bores
PART NO. DESCRIPTION 64966 3/4” Billet Aluminum, adapts Holley® 2300/2305 2-bbl. carbs to intake manifolds
with Holley® 4150/4160 4-bbl. bolt pattern; 2-hole plenum w/ 1.693” dia. bores
65042 Fits 4150-style Holley® carbs 65000 2” Cast Aluminum, adapts Holley® 4500 Dominator carburetor to Holley®
4150/4160 intake manifold bolt pattern
332
