Page 333 - 2018 Master Catalog

ALUMINUM FUEL LINE
Large diameter, .035” thick wall seamless tubing flows more
fuel and eliminates fuel starvation.
CARBURETOR
ACCESSORIES & PARTS PART NO. DESCRIPTION
PART NO. DESCRIPTION 65330 25’ Coil, 3/8” O.D.
65340 25’ Coil, 1/2” O.D.
65030 Carburetor Wedge Plate, fits Std. Holley® Bolt Pattern, Carb AFB/Edelbrock
65226 Clear-View Sight Plugs for Holley® Carbs, Two per pack
65441 Jet Extensions, 5/16”-32, HP Holley® Jets STREAMLINE FUEL
65225 Float Bowl Washer Kit, For Holley® Carbs LINE FITTINGS
65414 Hex Head Fuel Bowl Screws for Holley® Carbs., Four per pack PART NO. DESCRIPTION
65442 Holley® High Flow Squirter Screw, Cadmium-Plated Steel, Gasoline
65444 Slip Link, 1:1 Holley® 4150
65432 Oval Track Float Kit, fits Holley® Carbs 65140 90°, 3/8” NPT to 3/8” hose
65228 Drag Race Float Kit, fits Holley®Carbs

FUEL PRESSURE FUEL HOSE FITTINGS
GAUGE FITTINGS PART NO. DESCRIPTION
PART NO. DESCRIPTION
65375 1/4” NPT to 3/8” hose, One per package
65310 3/8” NPT Female to 3/8” NPT Male 65380 3/8” NPT to 3/8” hose, Two per package
65315 3/8” NPT Male to -6AN Male 65390 3/8” NPT to 1/2” hose, Two per package
65360 3/8” line with hose fitting
ALUMINUM FUEL
IN-LINE FUEL FILTERS BLOCK KITS
PART NO. DESCRIPTION PART NO. DESCRIPTION

65230 -8AN Fittings, 6-1/2” overall length 65160 1/2” hose inlet with (2) 3/8” hose outlets
97062 40 Micron Filter Element

LIGHTWEIGHT FUEL
PUMP PUSH RODS RACING AIR CLEANER
PART NO. DESCRIPTION PART NO. DESCRIPTION

65750 Lightweight Fuel Pump Push Rod, SBC and BBC 65910 14” dia. with 3” filter, Chrome plated steel, hand polished, PCV adapter included
16” Low Profile Air Cleaner w/ dropped bottom, 4” element,
65920
for 4500 Series, Dominator, King Demon Carbs
OXYGEN SENSOR BUNGS 65947 Reusable Foam Filter Shield, fits 14” x 5” filters
M-18 by 1.5 Thread Size.
PART NO. DESCRIPTION
CARBURETOR AIR PAN KIT
22732 Oxygen Sensor Bung, Stainless Steel, Single
22734 Plug, Steel with 17mm hex head, M-18 thread size PART NO. DESCRIPTION

HEX HEAD MOROSO STUD 65960 Single 4-bbl. Holley® carburetors with 5-1/8” neck
GIRDLE ADJUSTING NUTS
Fits either stock or roller rockers. Four per pack.
PART NO. DESCRIPTION VALVE COVERS
67170 Hex Head Adjusting Nuts, fits BBC Intakes, Use with #67295 PART NO. DESCRIPTION

68102 SBC - Stamped Steel, Chrome Plated, Tall Design, w/o Baffles - 3-1/2” Tall
PERM-ALIGN V/C GASKETS 68103 SBC - Stamped Steel, Chrome Plated, Tall Design, w/ Baffle in oil hole - 3-1/2” T
68112 BBC - Stamped Steel, Chrome Plated, Tall Design, w/o Baffle - 3-1/2” Tall
PART NO. DESCRIPTION 68113 BBC - Stamped Steel, Chrome Plated, Tall Design, w/ built-in Baffle - 3-1/2” T
68353 BBC - Fabricated Aluminum - 3” Tall - No Logo
93021 Fits 18, 16, 15, 13.5, & 12° Dart, Brodix, Edelbrock, and All Pro cylinder heads 68458 BBC - Fabricated Alum. - Tubes on intake side & pockets on exhaust side, Logo
93040 Fits BBC, Moroso Valve Covers and others of similar design 68181 BB Chrysler - Stamped Steel - Chrome Plated - Tall Design, w/ Baffles - 3.375”
93045 Fits Big Chief (does not fit Dart Big Chief II, 11° cylinder heads) 68770 Replacement Part: PCV Grommet
93055 Fits BB Chrysler 68772 Replacement Part: PCV Grommet with Baffle
93060 Fits Ford 221, 260, 289, 302, and 351W 93020 Replacement Part: Perm Align V/C Gasket
93065 Fits BB Ford 97340 Replacement Part: Breather/Filler Cap Grommets
333