Page 1261 - YG 2019

COBALT & HSS COBALT & HSS
END MILLS E2077 SERIES 8% COBALT (M42) END MILLS E2086 SERIES 8% COBALT (M42)
FLAT SHANK
FLAT SHANK
HSSCo8, 3 FLUTE STUB LENGTH FINE PITCH ROUGHING
HSSCo8, MULTI FLUTE LONG LENGTH FINE PITCH ROUGHING
CENTER CUTTING
▶This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very broad ▶This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very broad
spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality. spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.

P.1285, 1290, 1294 P.1285, 1290, 1294
Unit : Inch Unit : Inch
EDP No. Mill Shank Length Overall No.of EDP No. Mill Shank Length Overall
8% COBALT (M42) Diameter Diameter of Cut Length Flute 8% COBALT (M42) Diameter Diameter of Cut Length
71321 1/2 1/2 2 4 4 72297 1/4 3/8 1/4 2-1/16
71337 5/8 5/8 2-1/2 4-5/8 4 72305 3/8 3/8 3/8 2-5/32
71358 3/4 5/8 3 5-1/4 4 72321 1/2 1/2 1/2 2-1/2
71359 3/4 3/4 3 5-1/4 4 72337 5/8 5/8 5/8 2-3/4
71394 7/8 7/8 3-1/2 5-3/4 5 72359 3/4 3/4 3/4 2-7/8
71426 1 1 4 6-1/2 5 72391 7/8 3/4 7/8 3-1/8
71445 1-1/4 1-1/4 4 6-1/2 6 72422 1 3/4 1 3-1/4
71457 1-1/2 3/4 4 6-1/4 6 72426 1 1 1 3-1/2
71461 1-1/2 1-1/4 4 6-1/2 6 ■ The TiN coated, TiCN coated or TiAIN coated is available on your request.
71469 1-3/4 1-1/4 4 6-1/2 6 ■ Coating Codes for Cobalt
71477 2 1-1/4 4 6-1/2 6 Uncoated EDP NO. + CN(TiN), CC(TiCN), CF(TiAIN F), CE(TiAIN E), CH(Hardslick)
▶ Coated Price Shown in Price List. Call for Availability.
■ The TiN coated, TiCN coated or TiAIN coated is available on your request.
■ Coating Codes for Cobalt
Uncoated EDP NO. + CN(TiN), CC(TiCN), CF(TiAIN F), CE(TiAIN E), CH(Hardslick) Mill Dia.
▶ Coated Price Shown in Price List. Call for Availability. Tolerance (inch)
up to 1 0~+.0030
Mill Dia. over 1 0~+.0060 Enforced cutting edge
Tolerance (inch)
up to 1 0~+.0030
over 1 0~+.0060
Enforced Cutting Edge

◎ : Excellent ◯ : Good ◎ : Excellent ◯ : Good
P H M K N S P H M K N S
Carbon Alloy Prehardened Hardened Steels High Hardened High Carbon Alloy Prehardened High Hardened High
Steels Steels Steels Steels Stainless Cast Copper Graphite Aluminum Acrylic CFRP Titanium Temperature Steels Steels Steels Hardened Steels Steels Stainless Cast Copper Graphite Aluminum Acrylic CFRP Titanium Temperature
Steels
Iron
~HRc20 HRc20~30 HRc30~40 HRc40~45 HRc45~55 HRc55~70 Alloy ~HRc20 HRc20~30 HRc30~40 HRc40~45 HRc45~55 HRc55~70 Steels Iron Alloy
◎ ◎ ○ ○ ○ ◎ ◎ ○ ○ ○
1262 • phone:+1-800-765-8665, Technical Support : 888-868-5988, www.yg1usa.com phone:+1-800-765-8665, Technical Support : 888-868-5988, www.yg1usa.com • 1263