Page 603 - CarrLaneCatalog_2019ed-c.pdf
P. 603
AIR FEED BUSHINGS
ADAPTOR TIP ASSEMBLY
To mount air-feed drill, insert in liner and turn
30° counterclockwise to lock.
Collar
Shank
(Press fit in Collar)
STANDARD AIR-FEED DRILLS
SHANK
REDUCER COLLAR INFO+ pp. 603-611
(optional) INFO+
AIR-FEED-DRILL INFO+ p. 615 INFO+ pp. 603-611
NOSEPIECE
CONTOUR-NOSE
SHANK
INFO+ p. 602
AT-TYPE
ADAPTOR TIP
INFO+ p. 612
COOLANT-TYPE AIR-FEED DRILLS
COOLANT SHANK
COOLANT COOLANT INFO+ pp. 603-611
COOLANT-TYPE REDUCER COLLAR
AIR-FEED- (optional) INFO+ pp. 585-611
DRILL INFO+ p. 615
NOSEPIECE
COOLANT-NOSE
COOLANT SHANK - INFO+ p. 602
MOUNTING OPTIONS
13
TAPER-LOK TAPER-LOK
LINERS LOCK LINERS AIR-FEED LOCKSCREWS LOCKSCREWS LOCK STRIPS
INFO+ p. 614 INFO+ p. 615 INFO+ p. 613 INFO+ p. 613 INFO+ p. 613
New-design one-piece lock liner Conventional lock liner New-design lock screw Conventional-style lock Allows the closest
has angular locking surfaces for incorporating two lock especially for air-feed drills. screws. Install two lock possible hole spacing.
superior strength. Allows very screws. Hold in place Angular locking surface for screws and a liner bushing Use together with liner
close hole spacing. Hold in place with a lock nut. superior strength. Install two directly in jig plate. bushings.
with a lock nut. Also available lock screws and a liner directly
knurled for installing in plastic in jig plate.
tooling.
www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 601
