Page 185 - OEM RIGGING AND ACCESSORIES GUIDE (US-2017)

SMARTCRAFT RIGGING

SMARTCRAFT J-BOX TERMINATOR/RESISTOR PLUG ASY DIAGNOSTIC PORT
SMARTCRAFT RIGGING

859318T 1 6.85 8M0046339 21.99
SmartCraft Yellow 10‑pin Terminator/Resistor 10 pin diagnostic port for use on any SmartCraft application.
Provides CAN Bus termination for CAN P network. Used as a 10 pin diagnostic port for connecting Mercury Computer
859318B 1 6.82 Diagnostic System (CDS) junction box connection. Typically gets mounted
at the helm, out of line of site so that a technician does not have to disassemble
SmartCraft Junction Box Terminator/Resistor helm to plug into a 10 pin connection. Requires a harness from back of diagnostic
Provides CAN Bus termination where installed port to a 10 pin SmartCraft connection in the rigging.
Priced individually, sold @ multiples of 24
TERMINATOR ASSEMBLY SMARTCRAFT GAUGE HARNESSES
SC1000 SYSTEM TACHOMETER HARNESS

8M0055652 10.20
SmartCraft Terminator Can 1/P & H
84-879979T11 27.56
RESISTOR- TERMINATION- 2 PIN 3 ft. (.9 meters) Tachometer Harness
Provides connection to SC1000 System Tachometer, horn and SC100
Series Gauges. Requires the use of SmartCraft Junction Boxes listed in
SC1000 Section.
SC1000 SYSTEM SPEEDOMETER HARNESS

893388A01 6.63
Blue 2‑pin terminator/resistor
Provides CAN bus termination for CAN Networks.
HELM MPR 2 PIN WEATHER CAP
84-879978T11 26.00
3 ft. (.9 meters) Speedometer Harness
Provides connection to SC1000 System Speedometer, air temp, GPS
(0183) and horn. Requires the use of SmartCraft Junction Boxes listed in
SC1000 Section. See SC1000 System Speedometer product in SC1000 Section.

86-8M0054244 3.87
GT280 2 pin male weather cap.
Used on Joystick (Zeus, Axius and JPO) applications for the Helm MPR connection
harness 8M2021476.

172 Place Orders | Print Invoices | Register Product | Pay Online