Page 611 - US ACCESSORIES GUIDE (2019)
P. 611

SMARTCRAFT RIGGING



            SC1000 SYSTEM SPEEDOMETER HARNESS                   DUAL ENGINE INSTRUMENT ADAPTER













              84-879978T11                   43C95      73.25      84-892323T01                  21C94      36.57
                   WARNING: Cancer - www.P65Warnings.ca.gov            WARNING: Cancer - www.P65Warnings.ca.gov
            3 ft. (.9 meters) Speedometer Harness               Allows gauges to be powered from any key switch on dual applications
            Provides connection to SC1000 System Speedometer, air temp, GPS (0183) and  Works with all SmartCraft compatible engines
            horn. Requires the use of SmartCraft Junction Boxes listed in SC1000 Section.
            See SC1000 System Speedometer product in SC1000 Section.  TRIPLE ENGINE INSTRUMENT ADAPTER
                                                                   84-892323T08                  36C27      60.45
            3 FOOT SMARTCRAFT EXTENSION HARNESS
                                                                       WARNING: Cancer - www.P65Warnings.ca.gov
                                                                Allows gauges to be powered from any key switch on triple applications.
                                                                Works with all SmartCraft compatible engines
                                                                QUAD ENGINE INSTRUMENT ADAPTER
              84-8M0138593                   16C80      28.00
                   WARNING: Cancer - www.P65Warnings.ca.gov
            All 10 pins are populated in this SmartCraft 3 foot extension harness
            Used to extend SmartCraft connections up to 3 feet
            HARNESS EXTENSION- 10 PIN






                                                                   84-898284T01                  45C95      76.58
                                                                       WARNING: Cancer - www.P65Warnings.ca.gov
                                                                Allows gauges to be powered from any key switch on triple applications.
                                                                Works with all SmartCraft compatible engines.

              84-8M0058668                   16C87      28.12   SC 100 LINK HARNESSES
                   WARNING: Cancer - www.P65Warnings.ca.gov
            This harness extension will allow you to increase the length by 6 feet of the 10 pin  SYSTEM LINK ADAPTER KIT
            drop for instruments.  The extension will work with Side Mount controls as well as
            any 896537 series main engine / boat harness.
            DIAGNOSTIC HARNESS ADAPTER









                                                                   84-8M0052774                  56C58      94.30
                                                                       WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
                                                                Kit that drives SC100 Link Gauges from 10 Pin connection at the helm.  Contains
              84-859316T 1                   14C45      24.08   10 pin to 3 pin adapter and 3 pin to 3 pin low voltage reset module.
                   WARNING: Cancer - www.P65Warnings.ca.gov     Engine must be capable of providing Tach Link output and gray analog tach wire
                                                                must be populated in 10 pin connection at helm in order to utilize this kit.
      SMARTCRAFT RIGGING
            Service replacement harness for SmartTach communication.  Plugs between
            diagnostic port and engine harness






            598                                                 Place Orders | Print Invoices | Register Product | Pay Online
   606   607   608   609   610   611   612   613   614   615   616