Page 197 - 2018 Master Catalog

LS SERIES EWP® ADAPTOR KIT

Davies, Craig Pty Ltd announces the arrival of its innovative EWP® Header-Adaptor
Kit to suit the General Motors LS Series family of engines. These iconic V8 engines
are fast becoming the engine of choice for their lightweight and power. Now, the
addition of the Davies Craig Electric Water Pump Header-Adaptor Kit, coupled to The addition of the Davies Craig Electric Water Pump Header-Adaptor Kit,
one of the EWP®115, or EWP®130 or the EWP®150 Electric Water Pump Combo Kit coupled to one of the EWP®115, or EWP®130 or the EWP®150 Electric Water
will free up the parasitic power loss inherent with mechanical water pumps! Pump Combo Kit will:
• Replaces belt-driven mechanical water pump.
PART NO. DESCRIPTION • Increases engine horsepower!
• Provides superior engine cooling control!
DC-8650 LS Series EWP® adaptor kit • Eliminates heat soak!
DC-8611 Chevy Small Block EWP® adaptor kit • Simple do-it-yourself “plug & play” installation using some existing water pump hardware
DC-8621 Chevy Big Block EWP® adaptor kit
DC-8630 Ford Big Block EWP® adaptor kit
DC-8640 Ford Windsor Early EWP® adaptor kit
EWP®150 ALLOY
Designed with the high-performance pro, sprint,
tarmac, circuit and drag racer in mind this
rugged Alloy electric water pump has AN-16 in-
ternal threads at inlet and outlet for neat, tight,
dash fitting applications. All the same exciting
features offered on the EWP®150 are here on the
street-smart alloy EWP.
PART NO. DESCRIPTION

DC-8160 EWP®150 Alloy short kit

BRUSHLESS THERMATIC® FAN
LCD EWP® & FAN CONTROLLER The 14” one-directional ‘pusher’ Brushless

The unique LCD EWP®/Fan Digital Controller will manage the operation of your Thermatic Fan is a tidy compact nylon composite
chosen EWP® by varying the speed of your pump in response to coolant temperature shroud and blade with a long-life brushless mo-
and manage control of your electric Thermatic® Fan, No need for a separate thermal tor (10,000 hours), suitable for both condenser
switch. The Controller varies the speed of your EWP® looking for, and locking onto (air conditioning) and radiator (engine) cooling
your target temp. If the engine temp goes 3 degrees C over the target, the Controller in 12 Volt Applications.
will run your radiator fan until the target temp is restored. And it now does 12 & 24 PART NO. DESCRIPTION
Volt.
PART NO. DESCRIPTION DC-0140 14” Brushless Thermatic fan (12 Volt)
DC-0120 11” Brushless Thermatic fan (12 Volt)
DC-8000 LCD EWP® & FAN Controller (12 & 24V)

ELECTRONIC THERMAL
SWITCH - 12V
Digital Thermatic Fan Switch Kit can
be used with our Thermatic Fans,
EWP’s & competitors Fans. It senses air
temperature as it passes through the
radiator and has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF).
The Temperature Sensor is placed in the radiator fin section as close to the hot coolant
inlet as possible so no need to cut hoses.
• This switch is operated thermally & also when the air conditioning is in operation.
PART NO. DESCRIPTION
• Simply set the temperature by pressing the set button.
• It can run 1 or two fans. The second fan (if applicable) will start 10 seconds after Fan #1 runs.
DC-0444 Electronic thermal switch, 12 volt only • To convert temperature reading from Centigrade to Fahrenheit, remove the Jumper Pin on the
unit next to the LED screen.
197