Page 246 - Advanced Course

KNX ADVANCED COURSE

5.1.3 OR Function with Staircase Lighting Function and Maintained Light

Configure a 4-fold switch actuator with the application "Switch Logic Default Stairc.fct./2"
and activate the OR function in the parameters of channel A. Set the time delays shown in
the parameter window. Send the necessary group addresses to the switch or logic object
with a switch sensor.

Figure 15: Edit parameters – Staircase lighting function

Test the function of the following sequences:
OR function with staircase lighting function and maintained lighting

Familiarise yourself with the flow diagrams in the section describing the OR function
(Case 3).

Home and Building Management Systems KNX Association
Logic Operations Logic Operations_E0905b.doc 21/33