Page 425 - CarrLaneCatalog_2019ed-c.pdf

PLATFORM TOOLING PLATES

GRAY CAST IRON, ASTM CLASS 45

630mm
500mm

Standard 1/2” Heavy 5/8”

Raised tooling plate for machining-
center pallets. Allows tool access to low
workpieces below minimum spindle
height on horizontal machining centers.
Top and bottom surfaces are finish ground
to tight tolerances. All multipurpose holes
are spaced within .0008 inches of true
position. Available in the three largest
pallet sizes, with mounting holes to fit
almost any inch or metric slot spacing.
Incorporates JIS mounting (locating from
two reference edges). INFO+: See page 413
for mounting information.

10

APPROX.
MULTIPURPOSE HOLES A
E G H K WEIGHT
SIZE PART NO. THREAD ID SPACING PATTERN NOMINAL ACTUAL B C (JIS) (USA) (JIS) (USA) L S T (LBS)
5/18-11
STANDARD CL-MF40-0832 1/2-13 .5000 2.0000 6x6 500mm 17.75 7.8750 11.81 400mm 16 M16 2.953 9.8425 1.75 265
or M16
5/18-11
HEAVY CL-MF50-0833 5/8-11 .6250 2.0000 8x8 630mm 22.88 7.8750 15.75 500mm 20 M16 3.937 12.4016 2.00 360
or M16

www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 423