Page 87 - JKR HEALTH FACILITY ARCHITECTURAL NEEDS STATEMENT 2021 EDITION_Neat

SECTION 6.0 – INTERIOR WORKS FURNISHING AND OTHER FITTINGS SECTION 6.0 – INTERIOR WORKS FURNISHING AND OTHER FITTINGS

g) Materials and thickness shall use the following minimum standard steel c) All laboratory fittings for gas outlets shall be of the approved suitable
SECTION 6.0 – INTERIOR WORKS FURNISHING AND OTHER FITTINGS
thickness for furniture manufacturing: type following BS 1552. The design shall be robust in construction and
incorporated with a safety drop lever to prevent accidental ‘turn on’ of
g) Materials and thickness shall use the following minimum standard steel the gas tap.
PARTS
DETAILS
thickness for furniture manufacturing:
Metal Electro Galvanized (EG) Steel to provide extra d) The laboratory waste pipe fittings by mechanical means shall be from
protection against corrosion.
DETAILS
PARTS
Finishing Electrostatically applies powder coated with a an approved manufacturer and in accordance with BS 4991. The
Metal minimum thickness of 80 microns, semi-gloss mechanical pipe fitting shall be robustly constructed with an injection-
Electro Galvanized (EG) Steel to provide extra
finish. moulded component in chemical resistant black polypropylene
protection against corrosion.
Weight Load 200 kg per maximum leg span of 1.5 meters.
Finishing
Electrostatically applies powder coated with a
C-Channel 1.5 mm thick EG Steel with 45 Bevelled Front. complete with anti-siphonic bottle trap and dilution chamber.
minimum thickness of 80 microns, semi-gloss
1.6 mm thick RHS EG Steel
Leg support finish.
1.2 mm thick EG Steel Sheet
Weight Load
Cabinet body 200 kg per maximum leg span of 1.5 meters. e) Emergency showers shall be chain operated: floor mounted approved
Double-walled construction with sound dampen
C-Channel 1.5 mm thick EG Steel with 45 Bevelled Front. ing type of system fixed at an approved kind of system set at an
Cabinet front
Leg support material in between. appropriate overhead height not less than 2000 mm. The area
door/drawer
1.6 mm thick RHS EG Steel
Drawer rail
Cabinet body Powder-coated railing with soft close mechanism demarcated shall be laid to fall to stainless steel gratings.
1.2 mm thick EG Steel Sheet
Cabinet front and load bearing of 20 kg.
Double-walled construction with sound dampening
Door hinges material in between. f) All laboratory service fixtures shall be the product of one service fixture
110° wide opening with 2 parts detachable hinges
door/drawer
Powder-coated railing with soft close mechanism
Drawer rail and soft-close mechanism.
Glass viewing 6 mm thick tempered glass manufacturer to assure uniform appearance and ease of maintenance
and load bearing of 20 kg.
window 110° wide opening with 2 parts detachable hinges of the laboratory facility.
Door hinges
Castor and soft-close mechanism.
Polyurethane medical-grade dual-wheel castor
Glass viewing with gear lock. g) All laboratory service fittings shall be made of solid brass pressings
6 mm thick tempered glass
window alongside the high-quality brass tube.
Castor Polyurethane medical-grade dual-wheel castor
with gear lock.
h) The door hinges and drawer rail must come with a lifetime warranty from h) Undergo state of the art hydrostatic testing at 10 bar (145 psi) to
the specialist supplier.
ensure product quality and leakage-free operation.
h) The door hinges and drawer rail must come with a lifetime warranty from
i) Service dropper shall be inclusive of 3 compartments to separate the
the specialist supplier. i) Epoxy powder coated finishing.
wet and dry M&E services.

i) Service dropper shall be inclusive of 3 compartments to separate the j) All fixtures are tested to BS EN 5412:1996, which includes water
j) Reagent rack shall be slot-in type with a fully adjustable height for each
wet and dry M&E services. tightness and pressure resistance.
shelf. Each shelf should be able to withstand a load of 60 kg.

j) Reagent rack shall be slot-in type with a fully adjustable height for each
k) 3 compartments cable management trunking system shall be
shelf. Each shelf should be able to withstand a load of 60 kg. 6.2.4.5 Laboratory Loose Furniture
incorporated with the reagent rack and affix of 300 mm from the worktop
surface.
k) 3 compartments cable management trunking system shall be a) Provision for laboratory loose furniture shall not be part of the contract.

incorporated with the reagent rack and affix of 300 mm from the worktop
6.2.4.4 Laboratory Fittings and Accessories The procurement of laboratory loose furniture shall follow the current
surface. rules, policies, and procedures of Pekeliling Perbendaharaan (PP).

a) The laboratory furniture shall come complete with approved proprietary
6.2.4.4 Laboratory Fittings and Accessories b) All fit-outs and laboratory loose furniture shall be as design proposal
accessories and fittings necessary for the laboratories’ proper
functioning. and indicative only. Contractor shall indicate it in the Loaded Plans.
a) The laboratory furniture shall come complete with approved proprietary

accessories and fittings necessary for the laboratories’ proper
b) All laboratories shall be provided with a cold and hot water outlet, c) A detail schedule of laboratory loose furniture shall be drawn up as and
functioning. submitted as indicative proposal as shown in Appendix 8 – Schedule
complete with swivel neck nozzles and elbow action lever supplied by
an approved local manufacturer. of Loose Furniture.
b) All laboratories shall be provided with a cold and hot water outlet,
complete with swivel neck nozzles and elbow action lever supplied by
an approved local manufacturer. 78
2021 EDITION HEALTH FACILITY ARCHITECTURAL NEEDS STATEMENT

78 79
2021 EDITION HEALTH FACILITY ARCHITECTURAL NEEDS STATEMENT 2021 EDITION HEALTH FACILITY ARCHITECTURAL NEEDS STATEMENT