Page 940 - Deko-light Catalogue 2022

DEKO-LIGHT QUASAR HVM
230V DIMMING AND SWITCHING WITH A SMARTPHONE AND / OR BUTTON

With this small module, which is directly in a junction box Commissioning is child's play thanks to many preconfigured
or can be installed in a lamp canopy suitable lights, power scenes. To be able to use them, you only need to connect
supplies or other compatible 230V components can be potential-free buttons [1-4 depending on the function].
dimmed or switched directly. Via the 0-10V / 1-10V control Since standard push buttons are used, you can integrate
output, power supply units with the corresponding control Quasar into any existing electrical installation and thus into
input can still be dimmed and switched. the switch ranges of all manufacturers.
With the additional sensor function of the module, all
commercially available motion detectors, twilight switches
etc. that are equipped with a 230V switching output can
become a radio actuator. The problem solver wherever there
are no corresponding cables.

938 CONTROLLER | Quasar