Page 79 - SAMUI+MODEL STANDARD OPERATING PROCEDURES_P_V_6
P. 79
76
During the trip
- Limit the number of passengers on board not over 50 % of the capacity of the
vessels and vehicles.
- Equipment for one customer must be used by the customer alone until the end of
services. If the date of services is expanded, equipment must be cleaned and kept
separate and tagged with symbols or numbers.
- Close contact training is not allowed. The training process should be adjusted as
appropriate:
* Staff use their own equipment for demonstration instead of exchanging with
anyone.
* One must practice using alternate air sources by releasing air instead of
blowing it by mouth.
Customers avoid the buddy-check process but perform only self-check under
care by instructors.
* Refrain from touching cylinder valve outlet and regulator inlet.
* When preparing and putting on diving equipment, wash hands before and
after putting them on.
