Page 236 - OEM RIGGING AND ACCESSORIES GUIDE (US-2017)

ELECTRICAL

BATTERY BAR - MULTIPLE CONNECTOR BATTERY COVER - BLACK/NEGATIVE

BATTERY MULTIPLE CONDUCTOR KIT (WITH COVERS)

898289046 4.64
Negative (Black) Snap on cover used with Battery Bus Bar kits
Any 12 volt battery that uses the new Bus Bar Kit
898289Q45 40.00 BATTERY PLATE - 3/8 INCH (WITH FASTENERS)
New Battery Bus Bar Kit allows multiple connection points that result in
clean and direct connections for various electrical power needs. This will
eliminate stacking of ring terminals and reduce corrosion and loose
connections resulting in poor or faulty electrical connections.
Kit includes a 3/8 inch and a 5/16 inch mounting plate made of brass with all the
fasteners needed for multiple connections. This kit also includes a positive (red)
and negative (black) cover that snaps to the plate and provides protection to the
battery connections. (ABYC compliant)
Any 12 volt battery that has a 3/8 inch and 5/16 inch pmounting stud
BATTERY MULTIPLE CONDUCTOR KIT (NO COVERS) ELECTRICAL

898289A71 18.00
Multiple Conductor Battery Plate 3/8 inch (with fasteners) Clean up your
battery solutions with direct isolated connections

BATTERY PLATE - 5/16 INCH (WITH FASTENERS)
898289A48 18.00
Multiple Conductor Battery Plate with fasteners (No Covers)
Clean up your battery solutions with direct isolated connections
898289T47 34.51
New Battery Bus Bar Kit allows multiple connection points that result in BATTERY ISOLATORS
clean and direct connections for various electrical power needs. This will
eliminate stacking of ring terminals and reduce corrosion and loose Multi‑battery drain occurs when there are two or more batteries in a
connections resulting in poor or faulty electrical connections. charging system. Without a battery isolator, accessories attached to one
Kit includes a 3/8 inch and a 5/16 inch mounting plate made of brass with all the
fasteners needed for multiple connections. This kit does not include plastic snap battery will draw power from all other batteries in the circuit, leaving
on covers (ABYC compliant) them seriously rundown, or even dead. The Quicksilver Battery Isolator
Any 12 Volt battery with 3/8 inch and 5/16 inch studs is an electric current controlling device which isolates each battery in
the circuit. Each battery then discharges and charges accordingly.
BATTERY COVER - RED/POSITIVE Never does the load on one battery drain power from other batteries in
the system.
BATTERY ISOLATOR

898289045 4.64
Positive(Red) Snap on cover used with Battery Bus Bar kits
Any 12 volt battery that uses the new Bus Bar Kit
8M6001342 79.43
70 amp rated, for 1 permanent magnet generator (requiring regulator sensing) and
3 batteries.
Fits 2 cycle & 4‑Stroke Mercury/Mariner outboards (except OptiMax) with 16, dual
20 or 40 amp stator (permanent magnet generator) and a voltage regulator.

OEM Rigging & Accessories Guide & Price List 223