Page 541 - US ACCESSORIES GUIDE (2019)

MECHANICAL REMOTE CONTROLS

MSC 4000 SIDE MOUNT - ELECTRIC, POWER TRIM SIDE MOUNT REMOTE CONTROL 253C86 423.11
8M0103450
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
These controls provide a smooth shift/load feel and an improved
aesthetics. The control utilizes a 14 pin connector wiring harness and This control features a handle mounted power trim switch, 20 ft. (6.1 m) harness
with Amp 10‑pin connector. The control will connect to the engine models below
lanyard stop switch. The power trim models incorporate a single rocker without the use of an adapter harness.
type trim/trailer switch in the handle.This control is not for use with Used on MY2005 and newer, 8/9.9, 15/20 FourStroke engines with electric start
engines that have counter rotating lower units. Older engines may and power trim.
require a harness adapter. For 8/9.9 FourStroke engines generation change above S/N OR192772 and 15/20
FourStroke engines will use GEN I cables.
SIDE MOUNT REMOTE CONTROL-14 PIN GEN II cables must be used on other engines.
SIDE MOUNT REMOTE CONTROL-14 PIN (PORT SIDE
MOUNT)

8M0138640 252C87 421.44
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
This control features a handle mounted power trim switch and a 15 ft. (4.58 m)
harness with 14 pin Deutsch connector. The control will connect to the engine
models below without the use of an adapter harness.

For 2006 and newer non DTS 25‑300 HP Outboard engines.
GEN II cables must be used.
8M0138641 260C04 433.41
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
This control features a handle mounted power trim switch and a 20 ft. 8M0053636 244C88 408.14
(6.1 m) harness with 14 pin Deutsch connector. The control will connect to the WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
engine models below without the use of an adapter harness. This side mount control is for mounting on the port side and controlling with the left
For 2006 and newer non DTS 25‑300 HP Outboard engines. hand. This control features a handle mounted power trim switch and 15ft.(4.58m)
GEN II cables must be used. harness with 14 pin Deutsche connector.
SIDE MOUNT REMOTE CONTROL- 8 PIN TRADITIONAL For 2006 and newer non DTS 25‑300 HP Outboard engines.
GEN I cables must be used.
8M0103452 247C97 413.29 No Adapter harness required.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
This control features a handle mounted power trim switch, 15 ft. SIDE MOUNT REMOTE CONTROL-14 PIN
(4.58 m) harness, built‑in warning horn and power trim leads for front mount switch.
Fits all current Mercury/Mariner outboards (with integral power trim) and 1993 and
newer Force outboards 40 HP and higher utilizing Mercury style cables (with power
trim). When used with MY2005 and newer 8/9.9/15/20 FourStroke outboards an
adapter harness is required.
For MY2005 and newer 8/9.9 FourStroke outboards SAE T/S cables must be used.
MECHANICAL REMOTE CONTROLS This control features a handle mounted power trim switch, 20 ft. (6.1 m) harness, Has a handle mounted power trim switch and a 15 ft. (4.58 m) harness with 14 pin
GEN II cables must be used.
8M0103453
254C05
423.42
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
built‑in warning horn and includes power trim leads for front mount switch.
Fits all current Mercury/Mariner outboards (with integral power trim) and 1993 and
newer Force outboards 40 HP and higher utilizing Mercury style cables (with power
418.39
251C03
881170A13
trim). When used with MY2005 and newer 8/9.9, 15/20 FourStroke outboards an
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
adapter harness is required.
For MY2005 and newer 8/9.9 FourStroke outboards SAE T/S cables must be used.
GEN II cables must be used.
Deutshe connector and will direct connect to the engine models below without the
use of an adapter harness.
SIDE MOUNT REMOTE CONTROL- 10 PIN AMP
8M0103449
MY2005 and newer 8/9.9 FourStroke outboards. 8‑9.9 4 Stroke engines
247C79
412.98
generation change above S/N OR192772 and new 15/20 4 Stroke engines will use
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Gen I series T/S Cables
This control features a handle mounted power trim switch, 15 ft. (4.58 m) harness Ref. Throttle/shift cable Gen I ‑ 897977A__. Throttle/Shift cables (896143A) for
2006 ‑ 25‑ 300 HP 4 Stroke Any engine that has the 14 pin connector from the
with Amp 10‑pin connector. The control will connect to the engine models below
without the use of an adapter. primary harness. Gen I cables are required with this control
Used on MY2005 and newer, 8/9.9, 15/20 FourStroke engines with electric start 881170A14 257C12 428.53
and power trim. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
For 8/9.9 FourStroke engines generation change above S/N OR192772 and 15/20 Has a handle mounted power trim switch and a 20 ft. (6.1 m) harness with 14 pin
FourStroke engines will use GEN I cables. Deutshe connector and will direct connect to the engine models below without the
GEN II cables must be used on other engines. use of an adapter harness.
SIDE MOUNT REMOTE CONTROL- 14 PIN AMP Ref. Throttle/shift cable Gen I ‑ 897977A__. Throttle/Shift cables (896143A) for
MY2005 and newer 8/9.9 FourStroke outboards. 8‑9.9 4 Stroke engines
8M0138643 245C50 409.16 generation change above S/N OR192772 and new 15/20 4 Stroke engines will use
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Gen I series T/S Cables
This control features a handle mounted power trim switch, 15 ft. (4.58 m) harness 2006 ‑ 25‑ 300 HP 4 Stroke Any engine that has the 14 pin connector from the
with Amp 14‑pin connector. The control will connect to the engine models below primary harness. Gen I cables are required with this control
without the use of an adapter.
Fits all current Mercury/Mariner outboards 6 HP and above and 1993 and newer
Force outboards 40 HP and above (with power trim).
GEN II cables must be used.
528 Place Orders | Print Invoices | Register Product | Pay Online