Page 219 - Quicksilver Product Guide (2020) - 8M0163242

ELECTRICAL

LANYARD DIODE KIT LANYARD CORD

84-898289A72 823054Q
This kit is dual engine adapter that is required when connecting one lanyard stop Fork style lanyard used with the engine mounted stop switch on the 2.5, 3.3, 4/5
switch to two engines. Without this kit the engines would not be able to start or stop HP (2‑cycle), 4/5/6 (FourStroke) outboard engines.
independently. Priced individually, sold @ multiples of 2
Fits Mercury / Mariner outboards. Quicksilver Branded, Clamshell Package Point of Sale Packaged.
LANYARD STOP SWITCH CAP
OUTBOARD POWER TRIM SWITCH KITS
POWER TRIM SWITCH KIT

75095Q 2
Replacement cap for (65503A__ and 856654A__ series) Lanyard Stop Switches.
Fits Mercury/Mariner outboards and MCM/MIE engines.
Priced individually, sold @ multiples of 2 87- 18286A17
Quicksilver Branded, Clamshell Package Point of Sale Packaged. Rocker switch style with 10 ft.(3.05 m) harness and 3 blade connector. Installation
requires power trim "Y" harness (58366A 2). Provides tilt control from the bow or
LANYARD CORD - 54 INCH transom location.
Fits Mercury/Mariner models equipped with remote mounted trim pump.
POWER TRIM SWITCH KIT
QUICKSILVER® RIGGING

8M0092850
Lanyard cord with new ergonomic plastic clip, 54 inches in length.
Can be utilized on any Mercury Marine/Quicksilver lanyard stop switch at the helm.
Does not work with engine mounted stop switches. 87- 18286A18
Rocker style switch with 10 ft. harness and bullet connectors. Can be surface
Priced individually, sold @ multiples of 2 mounted or flush mounted. Provides tilt control from the bow or transom location.
Quicksilver Branded, Clamshell Package Point of Sale Packaged. Fits Mercury/Mariner models equipped with integral trim pump.
87- 18286A19
Rocker switch style with 25 ft.(7.62 m) harness and bullet connectors. Can be
surface mounted or flush mounted. Provides tilt control from the bow or transom
location.
Fits Mercury/Mariner models equipped with integral trim pump.

210