Page 31 - Mercury Service Tool Guide (2020) - 8M0163249

BRAVO STERNDRIVE

BEARING INSTALL TOOL POWER STEERING TEST GAUGE KIT

91-862530 91- 38053A05
Aids in the installation of the needle bearing and outer radial bearing. Test the power steering system pressure.
BEARING CARRIER TOOL POWER STEERING ADAPTER KIT

BRAVO STERNDRIVE Aids in the removal of the bearing carrier.
91-8M0145607
Bravo One
Bravo Two
SHIMMING TOOL
91-806908A02
Adaps power steering test gauge (P/N 38053A05) to test power steering control
values.
POWER TRIM TEST GAUGE KIT

91- 96512T
Gearcase pinion shimming tool. Aids in measuring the gearcase pinion height.
PLUG
91- 52915A 6
Test circuit pressures for various trim pumps.
FLUSHING ATTACHMENT

22- 38609
Aids in bleeding the in/down circuit on the remote trim pump.

44357Q 2
Will allow for running at idle speeds. Attaches to the water intakes; provides a
fresh water connection when flushing the cooling system or operating the engine.
Fits Mercury/Mariner 20 hp. and higher outboards, 9.9/15 hp. FourStroke (323cc)
Bigfoot outboards, all Model Year 2005 and Newer 8/9.9 hp. Four Stroke
outboards, 15 hp. FourStroke (351cc) outboards, all MerCruiser Sterndrives
(except Bravo One Perf. & Blackhawk) and MHP Torque Master gearcases.
Note: 2000 and newer V‑6 outboards and MerCruiser Bravo drives with dual water
pick‑up also require Dual Water Pick‑Up Flush Seal Kit p/n 881150Q 1.
Priced individually, sold @ multiples of 4
Quicksilver Branded, Clamshell Package Point of Sale Packaged.

24 Place Orders | Print Invoices | Register Product | Pay Online