Page 101 - Fluid Fitting 2018_extended

Fluid Fittings & Fluid Steels
Branding / Logo Usage Guide
The logo(s) should be used as supplied without modification.
Various formats are available upon request to suit all applications.
The following guidelines are to identify the logo makeup and are NOT to be used to recreate the logo except where express
permission has been given to do so.
INDEPENDANT LOGO USAGE
FLUID FITTINGS LOGO
COLOUR - Prefered Option
F
Fittings
The word “FLUID” - Franklin Gothic Heavy
The word “Fittings” - Helvetica Neue Light
The “F” device - Min Round
The colour breakdown for various uses is as follows:
Spot:
Red - PMS 485
Black - Pantone Black
CMYK:
Red
Red
Black
R: 0
C: 0
C: 0
R: 255
G: 0
M: 0
M: 100
G: 0
Y: 0
B: 0
Y: 100
B: 0
K: 0 F FLUID RGB: Black
K: 100
BLACK / GREYSCALE VERSION
F Fittings
EXCELLENCE IN SERVICE
HIGH QUALITY PRODUCTS F FLUID
If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:
Spot:
FUNCTION OF THE CUTTING RING COUPLING
Black - Pantone Black
Grey - Cool Grey 10
CMYK:
Grey Black RGB:
Note: The below listed working pressures are maximum for the series depending on Tube size.

C: 0
Red
Black
C: 0
R: 0
M: 0
M: 0

R: 75
For individual Tube Fitting size maximum working pressures see the following pages of this
G: 75
Y: 0
G: 0

Y: 0
section before the index page. K: 70 K: 100 B: 75 B: 0
TECHNICAL CHARACTERISTICS
The Cast fitting assures a perfect seal, independently from the fluid used, provided that no
corrosive fluids be employed and the nominal pressures not be trespassed. Fittings are
manufactured in three ranges to be chosen according to the required working conditions.
‘LL’ extra light range, suitable for low and medium working pressures up to 100 bar.
‘L’ light range, suitable for medium/high pressure applications, however not over 315 bar.
‘S’ heavy range, for severe conditions, with high pressures, water hammering, high temperatures
and a maximum pressure of 630 bar.
Vibrations according to the standards, don’t change the fitting’s performance that, even at
maximum values keeps its characteristics of absolute reliability.

PH: 0800 FITTINGS 24 HOURS. B35
Return to Start of Section Return to Main Index