Page 150 - belden

H O O K - U P A N D LE A D WIRE 150

Magnet Wire

Class 200 • One Pound Spool
• Bare Copper Conductor • 200°C
• Cross-Linked Polyester Base Coat • LJ-W-1177/14
• Amide-imide Polymer Top Coat • MW 35-C (Heavy) or MW 74-C (Heavy)

Class 200 magnet wire offers exceptional ability to resist solvents and abuse in difficult windings

Approximate Length
Part No. AWG (Solid) Turns per Linear Inch Turns per Square Inch
Feet Meters
8085* 38 19,300 5882.7 206.0 42,436
8083 34 7860 2395.8 133.1 17,716
8081 30 3140 957.1 86.2 7430
8080 28 1990 606.6 69.4 4816
8079 26 1260 384.1 55.7 3102
8078 24 793 241.7 44.7 1998
8077 22 501 152.7 36.0 1296
8076 20 315 96.0 28.9 835
8075 18 199 60.7 23.2 538
8074 16 126 38.4 18.6 346
8073 14 80 24.4 14.9 222
For available colors and put-ups, see the on-line Belden Technical Data Sheet for the part number at www.belden.com

Single Beldsol Solderable •
™
Half Pound Spool • Bare Copper Conductor • J-W-1177/9
• Polyurethane Base Coat • MW 28-C (Single)
• Nylon Top Coat • Rated by IEEE Tests for 270°F Usage
• Solders without Insulation
Removal at 750°F
• Solvent Resistant

Approximate Length
Part No. AWG (Solid) Turns per Linear Inch Turns per Square Inch
Feet Meters
8058 36 6400 1950.7 180.0 32,400
8057 34 4060 1237.5 144.0 20,736
8056 32 2515 766.6 114.0 12,996
8055 30 1615 492.3 91.7 8409
8054 28 1020 310.9 73.8 5446
8053 26 645 196.6 59.0 3481
8052 24 404 123.1 46.9 2200
8051 22 254 77.4 37.5 1406
8050 20 160 48.8 29.9 894
8049 18 100 30.5 23.9 571
For available colors and put-ups, see the on-line Belden Technical Data Sheet for the part number at www.belden.com

Fo r m o r e i n fo r m at i o n, c o n t a c t Be ld e n Te ch n i ca l S u ppo r t : 1- 8 0 0 - B E L D E N -1 • www. b e l d e n . c o m