Page 199 - APPLIED PROCESS DESIGN FOR CHEMICAL AND PETROCHEMICAL PLANTS, Volume 1, 3rd Edition

170 Applied Process Design for Chemical and Petrochemical Plants

Figure 3-15. Continued.

Enclosed double-suction Impeller with sealing rings on both sides.
(Courtesy The Deming Co.)

Impeller: Since the Sundyne straight, radial-bladed Impeller does not
require close running clearances, It ellmlnates the necessity for over-
sizing to compensate for performance deterioration common to con-
ventional pumps. Clearance of the Sundyne Impeller Is 0.030 to 0.070
Inch.
Inducer: An optional hellcal Inducer Is available to substantially
reduce the pump NPSH requirement.

Figure 3-13. Impeller and inducer (optional) for pumps in Figure 3-
12. (Courtesy Sundstrand Fluid Handling, Inc.)

all Mixed flow semi-enclosed Impeller. (Courtesy The Deming Co.)

'
.
'

Cross-section of
Heads and Impellers

Figure 3-14. Turbine pump. (Courtesy Roth Pump Co.)

Semi-open or semi-enclosed impeller. (Courtesy Goulds Pumps Inc.)

'

Enclosed single-suction Impeller with sealing on suction and back
sides. (Courtesy The Deming Co.)
'�
Figure 3-15. Impeller types. Open impeller for corrosive or abrasive
slurries and solids. (Courtesy Goulds Pumps, Inc.) Front Back