Page 715 - Latin America Accessories Guide (2020) - 8M0163252

STEERING

BRACKET-KICKER ENGINE ATTACHMENT 175HP+ KICKER ELECTRICAL KIT

892822A02 8M0149838
Unique bracket used to hook up a kicker engine with Verado. Special bracket is This system allows you to run your kicker engine and use the power steering
attached to Verado engine to allow attachments. system without your primary engine running. This system allows you to connect to
2005 Verado Engines 200‑300 HP a deep cell battery (not your starter battery) and the system will provide normal
power steering from the wheel. The system will alert you when your auxiliary
KICKER ENGINE BRACKET battery is below 9.5 volts. This signal means that you must start your primary
8M0097850 engine to change the battery system. This kit will save the starting battery for
primary starting use only. Must select the appropriate isolator to be paired with this
Bracket is used to mount a kicker engine with a Verado engine. system, dependent on engine configuration.
Bracket is used on Gen 5 Verado engines 175hp+ power steering systems with a kicker engine. 200‑350 Verado 2015 (Gen
5) and newer and all 175‑300hp 3.4L and 4.6L engines.
TROLLING MOTOR TIE BAR KIT WITHOUT DRIVE UNIT
HYDRAULIC STEERING - BASIC AND HEAVY DUTY
SYSTEMS
Both the Basic and the Heavy Duty Hydraulic Systems in this section
will use the hoses listed. (8M0053474 to 8M0053492) Note that the
Basic is for single engines only ‑ 150 HP and below. The Heavy Duty
systems are for single engines above 150 HP as well as multiple
engines. Fittings are listed in this section that can be installed to the
compression style connections.

67-892763A24 CYLINDER - HYDRAULIC - STANDARD
Heavy duty auxiliary steering kit connects an auxiliary trolling motor to your main
motor. It is 1/2 inch thick. Ideal for large Walleye/ Great Lakes boats with rough
water running conditions
Panther Model 55‑2700
TROLLING MOTOR TIE BAR KIT

STEERING This Basic hydraulic cylinder has the same robust performance design requirement
8M0141911
as our heavy duty cylinder. It is qualified to the same 300,000 cycle as our other
steering systems, has high strength fasteners, stainless steel arm, heavy duty triple
seal cartridges for enhanced duribilty and longevity high quality fittings using
swaged compression style hose connections.
All Single Outboard ‑ 150 HP and below
(1.5L Opti engine requires the special arm ‑ cylinder 8M0056619)

67-892763A14
Heavy duty auxiliary steering kit connects an auxiliary trolling motor to your main
motor. It is 1/2 inch thick. Drive bracket is 100% stainless steel. Ideal for large
Walleye/ Great Lakes boats with rough water running conditions
Panther Model 55‑2700

706 Phone: 954-744-3500; Fax: 954-744-3535; E-Mail: miami@mercmarine.com